Specification Sheet
6" Housing
L7X
INCANDESCENT
IC/Non-IC
New Construction
FEATURES & SPECIFICATIONS
INTENDED USE — Recessed housing rated IC or Non-IC. For new construction only.
Approved for all ceiling and wiring types.
Approved for direct burial in insulation.
CONSTRUCTION — Air-Tight standard. Tested to meet current energy codes.
Aluminum housing with galvanized steel pan.
Galvanized bar hangers span up to 24” o.c. and feature built in nailer and integral T-bar clips. Two locking
screws hold xture in position.
Galvanized steel junction box with four built-in Romex clamps; ve ½” and two ¾” nominal knockouts with
slots for pryout. Rated for through branch wiring.
Maximum 4 (2 in, 2 out) No 12 AWG conductors. Rated for 90° C.
Ground wire provided.
Removable J-box doors for easy access.
Trim retention (clips): Retaining clips riveted to top of reector hold trim inside housing.
Trim retention (TOR): Two-side mounted torsion springs on the trim and 2 receiving brackets in the can
ensure a consistently tight t with the ceiling.
ELECTRICAL — Durable medium base porcelain socket with nickel plated copper alloy screw shell and
contact.
Socket clips to top of housing to prevent paint overspray in socket screw shell.
Socket attaches to reector to ensure proper and consistent lamp position.
Thermal protection provided against improper lamp usage.
120 volts only.
INSTALLATION — Air-Tight housing suitable for air-tight installations.
2 x 8 wood joist or T-bar installation.
Expandable bar hangers allow for o center mounting in wood joist or T-bar ceilings.
Length of 25¼” maximum 13¼” minimum or cut to t 9” on center joist construction.
Vertical adjustment of housing allows for ush mounting with ceiling face.
Suitable to ceilings up to 1-1/2" thick.
LISTINGS — UL Listed to US and Canadian safety standards.
Damp location listing. (See trim selection for wet location listing).
WARRANTY — 1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may dier as a result of end-user environment and application.
Note: Specications subject to change without notice.
Specications
Height: 6-7/8 (17.5)
Length: 15 (38.1)
Width: 13-7/8 (35.2)
Ceiling cutout: 7 (17.8)
13-3/8”
(33.9)
14-1/8”
(35.9)
7-1/2”
(19.1)
6-7/8”
(17.5)
6-7/8”
(17.5)
7-7/8”
(20.00)
13-7/8"
(35.2)
7-7/8"
(20.0)
6-7/8"
(17.5)
15"
(38.1)
6-7/8"
(17.5)
6-7/8"
(17.5)
DOWNLIGHTING L7X
Catalog
Number
Notes
Type
Accessories: Order as separate catalog number.
ATK6 R6 6” Air-tight trim kit
HS6875 6-7/8" hole saw
L7X
Series Options Packaging
L7X Shipped installed in xture
PHC Poke-home wire connectors
GSKT Foam gasketing, aids in air-tight installation
R6 Resale pack of six
U Unit (non-stock)
ORDERING INFORMATION
For shortest lead times, congure product using bolded options.
Example: L7X R6
Notes
See trim summary on reverse side for maximum wattages.
All dimensions are inches (centimeters) unless otherwise specied.