Specification

One Lithonia Way, Conyers, GA 30012 | 770-922-9000 | www.lithonia.com
© 2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/09/18 Page 4 of 4
CONTRACTOR SELECT 6" INCANDESCENT LINE-VOLTAGE HOUSINGS AND TRIMS
CO1
INTENDED USE:
For use with housings L7X, L7XR.
INSTALLATION:
Socket to trim interface. Retaining clips riveted to top of reector hold trim inside housing.
LISTINGS:
UL Listed to US and Canadian safety standards. Damp location listing.
WARRANTY:
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specications subject to change without notice.
CB1
INTENDED USE:
For use with housings L7X, L7XR.
INSTALLATION:
Socket to trim interface. Retaining clips riveted to top of reector hold trim inside housing.
LISTINGS:
UL Listed to US and Canadian safety standards. Damp location listing.
WARRANTY:
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specications subject to change without notice.
Specifications Dimensions
Height: 5-7/8 (14.9)
Lamp opening: 4-1/4 (10.8)
Diameter: 7-3/4 (19.7)
Height: 5-3/8 (13.7)
Lamp opening: 4-5/8 (11.7)
Diameter: 7-3/4 (19.7)
All dimensions are inches (centimeters) unless otherwise indicated.