Specification

One Lithonia Way, Conyers, GA 30012 | 770-922-9000 | www.lithonia.com
© 2018 Acuity Brands Lighting, Inc. All rights reserved. Rev. 05/09/18 Page 2 of 4
CONTRACTOR SELECT 6" INCANDESCENT LINE-VOLTAGE HOUSINGS AND TRIMS
L7X
INTENDED USE:
Recessed housing rated IC or Non-IC. For new construction only. Approved for all ceiling and
wiring types. Approved for direct burial in insulation.
INSTALLATION:
Air-Tight housing suitable for air-tight installations. 2 x 8 wood joist or T-bar installation.
Expandable bar hangers allow for off center mounting in wood joist or T-bar ceilings.
Length of 25¼” maximum 13¼” minimum or cut to t 9” on center joist construction.
Vertical adjustment of housing allows for ush mounting with ceiling face.
Suitable to ceilings up to 1-1/2" thick.
LISTINGS:
UL Listed to US and Canadian safety standards. Damp location listing. (See trim selection for
wet location listing).
WARRANTY:
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specications subject to change without notice.
L7XR
INTENDED USE:
Recessed housing rated IC or Non-IC. For new construction only. Approved for factory
assembled wiring only. Approved for direct burial in insulation.
INSTALLATION:
Air-tight housing suitable for air-tight installations. Refer to energy codes for proper
installations. 2 x 8 existing ceiling or T-bar ceiling panel installation. Clip adjustment on
housing (up to 1-1/4”) allows for ush mounting with ceiling face. Socket attaches to reector
to ensure proper and consistent lamp position.
LISTINGS:
UL Listed to US and Canadian safety standards. Damp location listing. (See trim selection for
wet location listing).
WARRANTY:
1-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specications subject to change without notice.
Height: 6-7/8 (17.5)
Length: 15 (38.1)
Width: 13-7/8 (35.2)
Ceiling cutout: 7 (17.8)
Height: 7-1/2 (19.1)
Length: 12-1/4 (31.1)
Width: 5-3/4 (14.6)
Ceiling opening: 6-7/8 (17.5)
Ceiling cutout template: 6.65
All dimensions are inches (centimeters) unless otherwise indicated.
Specifications Dimentions