Specification

ManualsBrandsLithonia Lighting ManualsLightingContractor Select L7X Series 6 in. New Construction Air Tight Incandescent Recessed Housing

Catalog

Number

Notes

Type

CONTRACTOR SELECT 6" INCANDESCENT LINE-VOLTAGE HOUSINGS AND TRIMS Page 1 of 4

Catalog Number UPC Description Lamp Source Voltage Socket Pallet qty.

L7X R6 784231091906 6" New Construction Housing Incandescent 120V E26 Screw Shell 120

L7XR R6 745973789704 6" Remodel Housing Incandescent 120V E26 Screw Shell 144

Trims

Catalog Number UPC Description Flange Range Finish Lamp Included Pallet qty.

7B2W TOR R24 745975231416 6" Baffle Trim Narrow White No 576

7E1 TOR R6 784231085455 6" Eyeball Trim Narrow White No 300

CO1 R6 745973753095 6" Open Trim Wide White No 450

CB1W R6 745973753309 6" Baffle Trim Wide White No 450

Accessories: Order as separate catalog number.

ATK6 R6 6" Air-tight trim kit

HS6875 6-7/8" hole saw

CTR6 6" goof ring, white (8-3/4" O.D.)

Contractor Select

™

L7X/L7XR

6" Incandescent Line Voltage

Housings and Trims

Approved for direct burial in insulation and all ceiling and wiring types, these air-tight

6" recessed incandescent housings are rated IC/Non-IC for 2x8 new construction (L7X) or

remodel (L7XR) applications. New construction housings feature factory-installed captive

bar hangers that span up to 24 o.c. and feature a stepped shank nail with integral T-bar

locks. Two locking screws hold the xture position. The socket clips to trim to ensure proper

and consistent lamp position.

FEATURES:

¡ Damp location listed

¡ Retaining clips riveted to top of reector hold trim inside housing

¡ Suitable for ceilings up to 1-1/2" thick

¡ Trim options include 6" Open, Bafe and Eyeball

¡ All trims are available in a white nish

7B2W TOR

CB1W

CO1

7E1 TOR

Summary of content (4 pages)

PAGE 1
Catalog Number Notes Type Contractor Select™ L7X/L7XR 6" Incandescent Line Voltage Housings and Trims Approved for direct burial in insulation and all ceiling and wiring types, these air-tight 6" recessed incandescent housings are rated IC/Non-IC for 2x8 new construction (L7X) or remodel (L7XR) applications. New construction housings feature factory-installed captive bar hangers that span up to 24 o.c. and feature a stepped shank nail with integral T-bar locks.
PAGE 2
Specifications Dimentions L7X All dimensions are inches (centimeters) unless otherwise indicated. INTENDED USE: Recessed housing rated IC or Non-IC. For new construction only. Approved for all ceiling and wiring types. Approved for direct burial in insulation. Height: 6-7/8 (17.5) INSTALLATION: Air-Tight housing suitable for air-tight installations. 2 x 8 wood joist or T-bar installation. Expandable bar hangers allow for off center mounting in wood joist or T-bar ceilings.
PAGE 3
Specifications Dimensions 7B2W TOR All dimensions are inches (centimeters) unless otherwise indicated. INTENDED USE: For use with housings L7X, L7XR. Height: 6 (15.2) INSTALLATION: Socket to trim interface. Trim retention is achieved by utilizing two side-mounted torsion springs on the trim and two receiving brackets in the can, ensuring a consistently tight fit with the ceiling. Lamp opening: 5-7/8 (14.9) Diameter: 7-5/8 (19.4) LISTINGS: UL Listed to US and Canadian safety standards.
PAGE 4
Specifications Dimensions CO1 All dimensions are inches (centimeters) unless otherwise indicated. INTENDED USE: For use with housings L7X, L7XR. Height: 5-7/8 (14.9) INSTALLATION: Socket to trim interface. Retaining clips riveted to top of reflector hold trim inside housing. Lamp opening: 4-1/4 (10.8) Diameter: 7-3/4 (19.7) LISTINGS: UL Listed to US and Canadian safety standards. Damp location listing. WARRANTY: 1-year limited warranty. Complete warranty terms located at: www.acuitybrands.