Technical Specifications

Page 4 of 5
IBH LED High Bay
SINGLE RELAY
SELECTIONS BELOW WILL EXTEND ORDER LEAD TIME.
CONSULT YOUR SALES REPRESENTATIVE FOR DETAILS.
LSXR  Fixture Mount Sensor (see www.sensorswitch.com for additional information)
• Four interchangeable lenses.
• Integrated mounting bracket drops lens down 3” from chase nipple.
• Single or dual relay versions — designed with robust protection from the harsh switching requirements of T5 and LED loads.
• Photocell and 0-10VDC dimming options.
• No PIR eld calibration or sensitivity adjustments required.
LSXR conguration Comparable CMRB sensor Old style sensor nomenclature
For shortest lead times use one of the following LSXR congurations
LCOZU CMRB 50 MSI
LCH0SZU CMRB 50 D MSID
LCPZU CMRB 50 P MSIPED
LAOZU CMRB 6 MSI360
LAH0SZU CMRB 6 D MSI360D
LAPZU CMRB 6 P MSI360PED
Series Lens option Dimming/Photocell Max. dim Level Min. dim level Temp/Humidity Default time delay
L LSXR passive
infrared indoor
occupancy sensor
A High mount, 360°
B Low mount, 360°
C High mount aisleway
O None
1
H High/low occupancy operation
P Switching photocell (on/o)
M Dimming and switching
photocell
G Dimming and switching
photocell with high/low
occupancy operation
0 10 VDC
9 9 VDC
8 8 VDC
7 7 VDC
S Minimum dimming
level of ballast
1 1 VDC
2 2 VDC
3 3 VDC
4 4 VDC
5 5 VDC
6 6 VDC
Z None
T Low
temperature
I 30 seconds
D 2.5 minutes
X 5 minutes
R 7.5 minutes
U 10 minutes (with minimum
15 minutes on time)
V 15 minutes
W 20 minutes
Y 30 minutes
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: LAH0SZU
DUAL RELAY (Available with 120, 277, and 347V only)
Series Lens option Poles Operating mode Temp/Humidity Default time delay
L LSXR passive infrared
indoor occupancy sensor
A High mount, 360°
B Low mount, 360°
C High mount aisleway
2 Dual relay J None
K Alternating o relays (promotes even lamp wear)
O Alternating o relays w/photocell
P Switching photocell (on/o)
E Photocell on/o (pole 1 only)
F Photocell on/o - both poles (dual set-point)
Z None
T Low temperature
I 30 seconds
D 2.5 minutes
X 5 minutes
R 7.5 minutes
U 10 minutes (with minimum
15 minutes on time)
V 15 minutes
W 20 minutes
Y 30 minutes
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: LA2KZU
Notes
1 Dimming level elds not required when this option is chosen.
Replacement lenses: Order as separate catalog number.
Series
Lens
Lens type
6 High mount 360°
10 Low mount 360°
50 High mount aisleway
Package quantity
U Unit
J10 10-pack
J100 100-pack
Example: LENS 50 J100
IBH
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: [phone] Fax: [phone] www.lithonia.com © 2014 Acuity Brands Lighting, Inc. All rights reserved. Rev. 07/14/14