Technical Specifications

Page 1 of 5
IBH SD080 MD GZ10
Series Lumens Lens Distribution Voltage Driver Color temperature Color rendering index
IBH 9000LM 9,000 lumens
12000LM 12,000 lumens
18000LM 18,000 lumens
24000LM 24,000 lumens
30000LM 30,000 lumens
SD080 Semi-diuse acrylic MD Medium MVOLT MVOLT;
120-277V
HVOLT 347V-480V
120 120V
277 277V
GZ10 0-10V dimming 40K 4000 K
50K 5000 K
70CRI 70 CRI
80CRI 80 CRI
1
Options Finish
GLR Internal fast-blow fuse
2,3
OUTCTR Wiring leads pulled through back center of xture
OCS RELOC® OnePass® 5' installed
2
RRL RELOC®-ready luminaire. See page 5 for ordering information
SPD Surge protector
2,4
WGX Standard wire guard, installed
Cord sets:
5
CS1W Straight plug, 120V
2,6
CS3W Twist-lock, 120V
2,6
CS7W Straight plug, 277V
2,6
CS11W Twist-lock, 277V
2,6
CS25W Twist-lock, 347V
2,6
CS97W Twist-lock, 480V
2,6
CS93W 600V SEOOW white cord, no plug (no voltage required)
Motion sensors:
LCOZU Aisle motion sensor, pre-wired
2,7
LCHOSZU Aisle motion sensor, pre-wired; programmable dimming
2,7
LCPZU Aisle motion sensor with photocell; pre wired
2,7
LAOZU 360° motion sensor, pre-wired
2,7
LAHOSZU 360° motion sensor, pre-wired; programmable dimming
2,7
LAPZU 360° motion sensor with photocell, pre-wired
2,7
nPP16D nLight® switching/dimming module
2,8
nMSI nLight, aisle motion sensor, pre-wired
2,9
nMSI360 nLight, 360° motion sensor, pre-wired
2,10
nMSID nLight, aisle motion sensor, pre-wired, dimmng
2,11
nMSI360D nLight, 360° motion sensor, pre-wired, dimming
2,12
XAD Factory installed XPoint™ wireless 0-10V dimming relay
2,13
MSI6XADL DSCXADL 360° Xpoint wireless motion sensor with photocell
2,13
WH Gloss white
MB Matte black
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: IBH 18000LM SD080 MD MVOLT GZ10 40K 70CRI WH
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal one-for-one replacement of conventional lighting systems such as HID and
uorescent. Applications include manufacturing, warehousing and other large indoor spaces with mount-
ing heights ranging from 10’ – 40'. Luminaire shall be suspended a minimum 24" from ceiling. Surface
mounting is not permitted. Certain airborne contaminants can diminish integrity of acrylic.
Click here for Acrylic Environmental Compatibility table for suitable uses.
CONSTRUCTION — Lightweight aluminum heat sink designed to perform at warm ambient tem-
peratures. Due to precision thermal engineering for maximum naturally convective coding this xture
provides lumen droop that is less than uorescent. Fabricated steel channel provides maximum rigidity.
OPTICS — Medium distribution to meet both horizontal and ver tical light level requirements. Reectors
are precision formed and painted high reectance white. Semi-diuse lens is standard to provide glare
control and LED protection.
ELECTRICAL — 70% lumen maintenance at 97,000 hours; predicted life of more than 100,000 hours.
Thermally protected driver standard with 0-10V dimming.
LISTINGS — CSA certied to US and Canadian safety standards. Damp location listed. Ambient operating
temperatures vary please refer to chart on page 3.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may dier as a result of end-user environment and application.
Actual wattage may dier by +/-1% when operating between 120-277V +/-10%.
Note: Specications subject to change without notice.
LED High Bay
IBH
9,000 through 30,000 Lumens
Patent Pending
See footnotes on page 2.
Catalog
Number
Notes
Type
INDUSTRIAL IBH