Specification Sheet

Page 8 of 10
IBG LED High Bay
IBG
INDUSTRIAL: One Lithonia Way, Conyers, GA 30012 Phone: [phone] www.lithonia.com © 2016 Acuity Brands Lighting, Inc. All rights reserved. Rev. 09/14/16
SINGLE RELAY
SELECTIONS BELOW WILL EXTEND ORDER LEAD TIME. CONSULT YOUR SALES REPRESENTATIVE FOR DETAILS.
Series Lens option Dimming/Photocell Max. dim level Min. dim level Temp/Humidity
Default occupancy
time delay
Dim to off occupancy
time delay
2
L LSXR passive
infrared indoor
occupancy
sensor
A High mount,
360°
B Low mount,
360°
C High mount
aisleway
O None
1
H High/low occupancy
operation
P Switching photocell
(on/off)
1
M Dimming and
switching photocell
G Dimming and
switching photocell
with high/low oc-
cupancy operation
0 10 VDC
9 9 VDC
8 8 VDC
7 7 VDC
S Minimum
dim level of
ballast
1 1 VDC
2 2 VDC
3 3 VDC
4 4 VDC
5 5 VDC
6 6 VDC
Z None
T Low
temperature
I 30 sec
D 2.5 min
X 5.0 min
R 7.5 min
U 10.0 min
(with minimum 15
minute on time)
V 15.0 min
W 20.0 min
Y 30.0 min
0D 0 sec
1D 30 sec
2D 2.5 min
3
3D 5.0 min
4D 7.5 min
5D 10.0 min
6D 12.5 min
7D 15.0 min
8D 17.5 min
9D 20.0 min
SD Stays at dim
(never off)
ORDERING INFORMATION
Example: LAH0SZU2D
DUAL RELAY (Available with 120, 277, and 347V only)
Series Lens option Poles Operating mode Temp/Humidity Default occupancy time delay
L LSXR passive infrared
indoor occupancy sensor
A High mount, 360°
B Low mount, 360°
C High mount aisleway
2 Dual relay J None
K Alternating off relays (promotes even lamp wear)
O Alternating off relays w/photocell
P Switching photocell(on/off)
E Photocell on/off (pole 1 only)
F Photocell on/off - both poles (dual set-point)
Z None
T Low temperature
I 30 sec
D 2.5 min
X 5.0 min
R 7.5 min
U 10.0 min (with minimum
15 minute on time)
V 15.0 min
W 20.0 min
Y 30.0 min
ORDERING INFORMATION
Example: LA2KZU
Replacement lenses: Order as separate catalog number.
Series
LENS
Lens type
6 High mount 360°
10 Low mount 360°
50 High mount aisleway
Package quantity
[blank] Single Lens
J10 10-pack
J100 100-pack
Example: LENS 50 J100
Notes
1 Max and min dim levels not applicable with this option.
2 Only applicable for option H (High/low occupancy operation) & option M
(Dimming and switching photocell).
3 Default value if applicable and not specified in nomenclature.