Installation Instructions

1. Thread Gripple onto cable and

pass over ceiling anchor point.

2. Pass tail end of cable through

the other channel of the Gripple.

3. With xture supported, snap

hooks onto xture.

4. Adjust to proper height by pulling

cable through either end of Gripple.

HOW TO USE

RELEASE KEY

TO ADJUST

FIXTURE.

1. Make sure the load is

supported.

3. Release cable from Gripple.

5. Remove key and resecure

the load.

Mounting instructions for I-BEAM lighting xture using y-hook hanger.

2. Insert key into small hole at

top of Gripple. Push in 1/4” to

release the cable.