Technical Specifications
®
SPECIFICATIONS
ORDERING INFO
900 Northrop Road, Wallingford, CT 06492 • 1.800.PASSIVE • FX 203.269.9621 • www.sensorswitch.com
Revised 03.16.10 © 2010 Sensor Switch, Inc.
WARRANTY: Sensor Switch, Inc. warrants these products to be free of defects in manufacture and workmanship for a
period of 60 months. Sensor Switch, Inc., upon prompt notice of such defect, will, at its option, provide a Returned Material
Authorization number and repair or replace returned product.
LIMITATIONS AND EXCLUSIONS: This Warranty is in full lieu of all other representation and expressed and implied
warranties (including the implied warranties of merchantability and tness for use) and under no circumstances shall
Sensor Switch, Inc. be liable for any incidental or consequential property damages or losses.
MOUNTING INSTRUCTIONS
T239-001
The FB3 Series Snap-in Fixture Bracket provides a convenient method
of lowering a xture mount style sensor such that its view is not impeded
by edge of luminaire. Three sensor mounting positions provide exability
for usage on a wide variety of xtures.
FB3
APPLICATIONS
Enables lower mounting of sensors in order to
avoid view impediments
FEATURES
3 Sensor Mounting Positions
Simple Snap-in Design
Made in U.S.A.
PHYSICAL SPECS
SIZE (main bracket housing)
5.00” H x 2.00” W x 1.35” D
( 12.70 cm H x 5.08 cm W x 3.43 cm D)
WEIGHT 2.52 oz each (excluding nuts)
MOUNTING 1/2” knockout
DESCRIPTION
FB3 Snap-in Fixture Mount Bracket
FB3 J100 Snap-in Fixture Mount Bracket (100 count box)
MODEL NUMBER
1. Mount sensor to main bracket housing using
lock washer and nut.
SNAP-IN FIXTURE MOUNT BRACKET
3. Snap entire assembly to xture via 1/2” knockout.
4. Rotate/Align the sensor such that the sensor lens is
parallel to oor.
2. Attach the snap plate and blank plate to main bracket
housing in one of three congurations (gures a-c) such that
bottom of main bracket housing will be ush or lower than
bottom edge of xture once attached.
A
C
4
3/8
”
2
1/2
”
1
1/4
”
B
Snap Plate
Main Bracket Housing
Blank Plate