Specification

Catalog
Number
Notes
Type
Compact Fluorescent Downlighting
6" LF6N
OPEN REFLECTOR
Horizontal, 2-Lamp Double Twin-Tube (DTT)
Specifications
Max. height: 6-3/8 (16.2)
Ceiling opening: 7 (17.8)
Overlap trim: 7-1/2 (19.1)
Length: 13 (33.0)
Width: 11 (27.9)
All dimensions are inches (centimeters) unless otherwise indicated.
FEATURES & SPECIFICATIONS
INTENDED USE — Ideal for a wide variety of low- to medium-height ceiling applications including
commercial, retail and hospitality spaces where an open or damp location lensed xture is required.
CONSTRUCTION — Heavy gauge die formed galvanized steel mounting frame with mechanical
trim retention (yoke) ensures secure and ush reector mounting to ceiling. Attached to frame are
vertically adjustable mounting brackets for use with C channels, ½” steel conduit or 16 gauge at bar
hangers included, standard. Frames equipped with galvanized junction box UL Listed for through wire
applications. Junction boxes equipped with (2) ¾” and (4) ½” conduit knockouts with pryout slots and
removable access doors.
Maximum 1-1/2” ceiling thickness.
OPTICS — Aluminum full reectors are optically designed to maximize lumen output and to provide
superior glare control. Anodized nishes for open reectors are semi-specular or diuse in a variety of
colors. Polyester powder coat nishes also are available in white.
Lenses are available in clear at glass, tempered prismatic glass, or polycarbonate to provide optimal
visual comfort and improved aesthetics. Lens is recessed 1-1/2 (3.8) from ange.
ELECTRICAL — Electronic ballast with end of lamp life protection standard. Class P thermally protected
ballast protects against improper contact with insulation. Minimum starting temperature is 0°F/-18°C.
Rated for #12 AWG conductor thru-branch wiring. Minimum 90° supply wire.
Ground wire provided.
Lamp Socket Base:
DTT 4-pin lamps – 13W (G24Q-1); 18W (G24Q-2); 26W (G24Q-3)
LISTINGS — Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting, damp location,
and to U.S. and Canadian Safety Standards.
Note: Specications subject to change without notice.
Notes
1 Not available with ADEZ or ECOS.
2 Not available with CGL, T73 and PCL lens.
3 Electronic multi-volt ballast capable of operating any line voltage from 120-277V, 50 or 60Hz.
4 Not available with EL or ELR.
5 For additional options see www.lithonia.com.
6 Ships standard for 1-lamp operation. For 2-lamp operation, consult installation instructions or factory. Add 3”
(7.6) to width and 4-1/2” (11.4) to length.
7 Not recommended for eld installation.
8 One 5A relay with one 0-10 VDC dimming output, shipped installed. Requires additional nLight bus power supply.
DOWNLIGHTING LF6N-OPEN-2-DTT
Accessories: Order as separate catalog number.
SCA6 Sloped ceiling adaptor. Degree of slope must be
specied (10D, 15D, 20D, 25D, 30D) Ex: SCA6 10D.
CTE6 Ceiling thickness extender is used when ceiling
thickness is greater than 1-1/2 (3.8). Maximum
thickness 2 (5.1).
LF6N
Series Wattage/Lamp Reector/Color Lens type Voltage Options
5
LF6N 2/13DTT
1
2/18DTT
2/26DTT
F6O2 White open
F6O2A Clear diuse open
F6O2AZ Clear semi-specular
open
F6O2G Gold diuse open
F6O2GZ Gold semi-specular
open
F6O2PR Pewter diuse open
F6O2WTZ Wheat semi-specular
open
F6C3BLZ Black specular open
cone
2
(blank) No lens
CGL Clear glass lens
T73 Tempered glass
prismatic lens
PCL Clear polycarbonate
lens
MVOLT
3
120
277
347
4
ADEZ Advance Mark 10™ electronic dimming ballast, 120V or 277V. Must be
wattage and voltage specic. Minimum dimming level 5%
ECOS Lutron EcoSystem electronic dimming ballast, 120V - 277V. Must be
wattage specic. Minimum dimming level 5%
EL Emergency PSDL3 DL battery pack with integral test switch. Lens
removal required before EL testing
6
ELR Emergency PSDL3 DL battery pack with remote test switch
6
ELRHL2LP Iota I-162 Emergency battery pack with remote test switch. Operates
two 26W CFL lamps in emergency mode with battery back-up in case of
power disruption. Average lumen output is 2600
7
GMF Single slow-blow fuse, must specify voltage
BDP Ballast disconnect plug (meets codes that require in-xture disconnect)
4
RIF1 Radio interference lter
LBH Less barhangers
WLP 35K lamp (shipped separately)
NSD Sensor Switch nLight™ dimming relay
8
TRW White ange
ORDERING INFORMATION
For shortest lead times, congure product using bolded options.
Example: LF6N 2/26DTT F6O2AZ MVOLT
6-3/8
(16.2)
7-1/2
(19.1)
11
(27.9)
13
(33.0)
6-3/8
(16.2)
6-1/8
(15.6)
7-1/2
(19.1)


