Specification

ManualsBrandsLithonia Lighting ManualsCeiling Lights6 in. Clear Diffuse Open Reflector Compact Fluorescent Downlight Trim

Catalog Number

Notes Type

FEATURES & SPECIFICATIONS

INTENDED USE

Ideal for a wide variety of low- to medium-height ceiling applications including

commercial, retail and hospitality spaces where an open or damp location lensed

ﬁxture is required.

CONSTRUCTION

Heavy gauge die formed galvanized steel mounting frame. Attached to frame are

vertically adjustable mounting brackets for use with C channels, ½” steel conduit

or 16 gauge ﬂat bar hangers included, standard. Frames equipped with galvanized

junction box UL Listed for through wire applications. Junction boxes equipped with

(2) ¾” and (4) ½” conduit knockouts with pryout slots and removable access doors.

Maximum 1-1/2” ceiling thickness.

OPTICS

Aluminum full reﬂectors are optically designed to maximize lumen output and to

provide superior glare control. Anodized ﬁnishes for open reﬂectors are semi-

specular or diffuse in a variety of colors. Polyester powder coat ﬁnishes also are

available in white.

Lenses are available in clear ﬂat glass, tempered prismatic glass or polycarbonate

to provide optimal visual comfort and improved aesthetics. Lens is recessed 1-1/2

(3.8) from ﬂange.

ELECTRICAL

Electronic ballast with end of lamp life protection standard. Class P thermally

protected ballast protects against improper contact with insulation. Minimum

starting temperature is 0°F/-18°C.

Rated for #12 AWG conductor thru-branch wiring. Minimum 90° supply wire.

Ground wire provided.

Lamp Socket Base:

DTT 4-pin lamps – 18W (G24Q-2); 26W (G24Q-3)

TRT 4-pin lamps – 18W (GX24Q-2); 26W (GX24Q-3); 32W (GX24Q-3); 42W (GX24Q-4)

LISTING

Fixtures are UL Listed for thru-branch wiring, Non-IC recessed mounting, damp

location, and to U.S. and Canadian Safety Standards.

Compact Fluorescent Downlighting

6” LF6N

OPEN REFLECTOR

Horizontal 1-Lamp, Triple Tube (TRT)

All dimensions are inches (centimeters).

Speciﬁcations

Max. height: 6-3/8 (16.2)

Ceiling opening: 7 (17.8)

Overlap trim: 7-1/2 (19.1)

Length: 13 (33.0)

Width: 11 (27.9)

Series

LF6N

Wattage/lamp

1/18DTT

1/26DTT

1/18TRT

1/26-42TRT

1/26TRT

1/32TRT

1/42TRT

Voltage

MVOLT

120

277

347

Options

ADEZ Advance Mark 10™ electronic dimming ballast,

120V or 277V. Must be voltage speciﬁc. Mini-

mum dimming level 5%

ECOS Lutron EcoSystem electronic dimming ballast,

120V - 277V. Must be wattage speciﬁc. Mini-

mum dimming level 5%

EL Emergency PSDL3 DL battery pack with

integral test switch. Lens removal re-

quired before EL testing

ELR Emergency PSDL3 DL battery pack with

remote test switch

ELHL Iota I-420-R High lumen output emergency battery

pack. Internal test switch provided. Maximum

average lumen output is 1300 (42W)

ELRHL Iota I-420-EM-B High lumen output emergency

battery pack. Remote test switch provided.

Maximum average lumen output is 1300 (42W)

GMF Single slow-blow fuse, must specify voltage

BDP Ballast disconnect plug (meets codes that

require in-ﬁxture disconnect)

RIF1 Radio interference ﬁlter

LBH Less barhangers

WLP 35K lamp (shipped separately)

NSD Sensor Switch nLight™ dimming relay

TRW White ﬂange

NOTES:

1 Not available with ECOS or WLP.

2 Electronic multi-volt ballast capable of operating any

line voltage from 120-277V, 50 or 60Hz.

3 Not available with EL or ELR.

4 Add 3” (7.6) to width and 4-1/2” (11.4) to length.

5 Not recommended for ﬁeld installation.

6 One 5A relay with one 0-10 VDC dimming output,

shipped installed. Requires additional nLight bus

power supply.

7 For additional options see lithonia.com.

Reﬂector/color

F6O1 White open

F6O1A Clear diffuse

open

F6O1AZ Clear semi-

specular open

F6O1G Gold diffuse

open

F6O1GZ Gold semi-spec-

ular open

F6O1PR Pewter diffuse

open

F6O1WTZ Wheat semi-

specular open

Downlighting and Track

Lens type

(blank) No lens

CGL Clear glass lens

T73 Tempered glass

prismatic lens

PCL Clear polycar-

bonate lens

Sheet #: LF6N-OPEN-1-TRT

For shortest lead times, conﬁgure product using standard options (shown in bold).

Example: LF6N 1/26-42TRT F6O1AZ MVOLT

ORDERING INFORMATION

Accessories

Order as separate catalog number

SCA6 Sloped ceiling adaptor. Degree of slope

must be speciﬁed (10D, 15D, 20D, 25D,

30D) Ex: SCA6 10D.

CTE6 Ceiling thickness extender is used when

ceiling thickness is greater than 1-1/2

(3.8). Maximum thickness 2 (5.1).

6-3/8

(16.2)

6-1/4

(15.9)

7-1/2

(19.1)

6-3/8

(16.2)

7-1/2

(19.1)

(27.9)

(33.0)

Summary of content (2 pages)

PAGE 1
Catalog Number Notes Type FEATURES & SPECIFICATIONS INTENDED USE Ideal for a wide variety of low- to medium-height ceiling applications including commercial, retail and hospitality spaces where an open or damp location lensed fixture is required. CONSTRUCTION Heavy gauge die formed galvanized steel mounting frame. Attached to frame are vertically adjustable mounting brackets for use with C channels, ½” steel conduit or 16 gauge flat bar hangers included, standard.
PAGE 2
6” LF6N Horizontal 1-Lamp, Triple Tube (TRT), Open Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire LF6N 1/32TRT F6O1AZ MVOLT, (1) Philips PL-C 32W/27SH lamp, 1.2 s/mh, 2400 rated lumens, Test no. LTL12515 cp 90˚ 100 70˚ 200 300 50˚ 400 500 600 10˚ 30˚ 0 5 15 25 35 45 55 65 75 85 90 598 612 639 533 471 444 137 11 3 1 0 Lumens 59 178 247 296 330 135 12 3 1 Zone Lumens % Lamp 0˚ - 30˚ 483.7 20.