Specification

Page 2 of 2
CONTRACTOR SELECT EXRG LED Exits
One Lithonia Way, Conyers, GA 30012 | 800-705-SERV (7378) | [e-mail] | www.lithonia.com
© 2020 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/16/20
INTENDED USE:
LED lighted exit signs for marking the means of egress in accordance with Life Safety Code
NFPA 101. The EXRG has an internal switch that ships standard as a red exit and can be
switched in the eld to green. It is also packaged standard with an extra faceplate along
with red and green inserts.
CONSTRUCTION:
Injection-molded, ame-retardant, high-impact, thermoplastic housing with snap-t design
components for easy installation. Universal J-box pattern. Universal chevrons are easily
removed for directional indication.
Fully assembled single face with extra faceplate for easy eld-conversion to double face.
Letters 6" high with 3/4" stroke, with 100 ft viewing distance rating, based on UL924
standards.
OPTICS:
The typical life of the LED lamp is 10 years.
ELECTRICAL:
Dual-voltage input 120V or 277V AC. Non-emergency (AC only without battery) or Emergency
exit with battery. The emergency model includes the test switch, status indicator and
rechargeable battery.
Battery: (EL models) maintenance-free Nickel metal hydride battery provides 90 minutes of
emergency power.
INSTALLATION:
Top, back or end mounting capability (canopy included).
LISTINGS:
UL Listed. Meets UL 924, NFPA 101 (current Life Safety Code) , NFPA 70-NEC, FCC Title 47, Part
15, Subpart B and OSHA illumination standards. Indoor damp location 50° to 104°F (10°C to
40°C) listed standard.
WARRANTY:
2-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/warranty/terms-and-conditions
All life safety equipment, including emergency lighting for path of egress must be
maintained, serviced, and tested in accordance with all National Fire Protection Association
(NFPA) and local codes. Failure to perform the required maintenance, service, or testing could
jeopardize the safety of occupants and will void all warranties.
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
Length: 11.63 (29.5)
Depth: 1.63 (4.1)
Height: 7.2 (18.3)
Weight: EL: 1.6 LB
AC: 1.59 LB
All dimensions are inches (centimeters) unless otherwise indicated.