Specification Sheet

Pg. 1 of 2
Catalog
Number
Notes
Type
EMERGENCY EU2C
FEATURES & SPECIFICATIONS
INTENDED USE
Suitable for emergency lighting applications such as stairways and hallways.
Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate.
Click here for Acrylic-Polycarbonate Compatibility table for suitable uses.
CONSTRUCTION
Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components with
LED lamps for easy installation. Universal J-box pattern (j-box not included). Track and swivel arrangement
permits full range of lamp adjustment.
OPTICS
The typical life of the LED is 10 years. Two 1W LED lamps for emergency light.
Optional high-output battery to power both local and optional LED remote lamp heads simultaneously. The
HO option provides additional 3W of LED remote capacity (up to 2 LED remote heads).
ELECTRICAL
Dual voltage input 120V or 277V AC, 60hz. Emergency unit provided with test switch, status indicator and
rechargeable battery. Maintenance-free nickel-cadmium battery provides 90 minutes of emergency power.
INSTALLATION
Wall mount only (not suitable for ceiling mount).
LISTINGS
UL Listed. Meets UL 924, NFPA 101 (current Life Safety Code), NFPA 70-NEC, California Energy Commission
Title 20 section 1605.3 (W)(4), FCC Title 47, Part 15, Subpart B and OSHA illumination standards. Indoor damp
location 50°F to 104°F (10°C to 40°C) listed standard.
WARRANTY
2-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/customer-support/terms-and-conditions
All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and
tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the
required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
Lithonia Lighting Basics™ LED Emergency Light
EU2C
LED Lamps
TM
Accessories Notes:
1. See spec sheet ELA-WG.
2. Available with HO option only.
3. See spec sheet ERE remote head.
Notes:
1. HO not available with SD option.
2. SD not available with HO (High Output).
Accessories: Order as separate items.
ELA WG1 Wireguard (back mount only)
1
ERE W SGL SQ M12 Single, LED indoor remote head, square, ivory white, 0.75W, 3.6V-12V voltage sensing
2,3
ERE W T SQ M12 Twin LED indoor remote head, square, ivory white, 1.5W, 3.6V-12V voltage sensing
2,3
ERE GY SGL WP SQ M12 Single, LED outdoor remote head, square, gray 1W, 3.6V-12V voltage sensing
2,3
ERE GY T WP SQ M12 Twin LED indoor remote head, square, gray 2W, 3.6V-12V voltage sensing
2,3
Series Housing Color Options
EU2C Emergency Light (Blank) Ivory white
B Black
(Blank) Not Required
HO High Output
1
SD Self Diagnostics
2
ORDERING INFORMATION
For shortest lead times, configure product using bolded options.
Example: EU2C
Battery Remote Capacity* Maximum# Remote Lamp Heads*
3.6V 3W
2 - ERE W SGL SQ M24
1 - ERE W T SQ M24
2 - ERE GY SGL WP SQ M12
1 - ERE GY T WP SQ M12
* These are in addition to the lamp heads on the product
Description
Supply
Voltage
Input Wattage Input Amps
120 277 120 277
Standard (No Options) 120/277 .56 .70 .072 .072
High Output Option (HO) 120/277 .81 1 .12 .12
Self Diagnostic Option (SD) 120/277 .06 .75 .09 .09
All dimensions are inches (centimeters) unless otherwise indicated.
Weight (shipping): 1.7 lbs. (0.77 kgs.)
10-1/8
3-3/4
(9.5)
5-3/8 (13.7)
14-5/8
3-3/4
(9.5)
2
(5.1)
† Small Battery Chargers Certified in the CA Title 20 Appliance Efficiency Database.
†
Looking for Contractor Select readily available
configurations? Click here to visit Contractor Select™
spec sheet or go to www.contractorselect.com