Specification

Pg. 1 of 2
Catalog
Number
Notes
Type
EMERGENCY EU2C
FEATURES & SPECIFICATIONS
INTENDED USE
Suitable for emergency lighting applications such as stairways and hallways.
Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate.
Click here for Acrylic-Polycarbonate Compatibility table for suitable uses.
CONSTRUCTION
Injection-molded, flame-retardant, high-impact, thermoplastic housing with snap-fit design components with
LED lamps for easy installation. Universal J-box pattern (j-box not included). Track and swivel arrangement
permits full range of lamp adjustment.
OPTICS
The typical life of the LED is 10 years. Two 1W LED lamps for emergency light.
ELECTRICAL
Dual-voltage input 120V or 277V AC. Emergency unit provided with test switch, status indicator and recharge-
able battery. Maintenance-free nickel-cadmium battery provides 90 minutes of emergency power.
Optional high-output battery to power both local and optional LED remote lamp heads simultaneously. The
HO option provides additional 3W of LED remote capacity (up to 2 LED remote heads).
INSTALLATION
Wall mount only (not suitable for ceiling mount).
LISTINGS
UL Listed. Meets UL 924, NFPA 101, NFPA 70-NEC, California Energy Commission Title 20 section 1605.3 (W)
(4), FCC and OSHA illumination standards. Indoor damp location 50°F to 104°F (10°C to 40°C) listed standard.
WARRANTY
2-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
All life safety equipment, including emergency lighting for path of egress must be maintained, serviced, and
tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the
required maintenance, service, or testing could jeopardize the safety of occupants and will void all warranties.
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
Emergency Light
EU2C
LED Lamps
TM
Notes:
1. See spec sheet ELA-WG.
2. Available with HO option only.
Notes:
1. SD not available with HO (High Output).
Accessories: Order as separate items.
ELA WG1 Wireguard (back mount only)
1
ELA Q L0304 Single LED indoor remote head, white, 1.5W, 3.6V
2
ELA T Q L0304 Twin LED indoor remote head, white, 3W, 3.6V
2
ELA QWP L0304 Single LED weather-proof remote head, gray, 1.5W, 3.6V
2
ELA T QWP L0304 Twin LED weather-proof remote head, gray, 1.5W, 3.6V
2
Series Housing Color Options
EU2C Emergency Light (Blank) White
B Black
(Blank) Not Required
HO High Output
SD Self Diagnostics
1
ORDERING INFORMATION
For shortest lead times, configure product using bolded options.
Example: EU2C
Battery Remote Capacity* Maximum# Remote Lamp Heads*
3.6V 3W
2 - ELA Q L0304
1 - ELA T Q L0304
2 - ELA QWP L0304
1 - ELA T QWP L0304
* These are in addition to the lamp heads on the product
Description
Supply
Voltage
Input Wattage Input Amps
120 277 120 277
Standard (No Options) 120/277 .56 .70 .072 .072
High Output Option (HO) 120/277 .81 1 .12 .12
Self Diagnostic Option (SD) 120/277 .06 .75 .09 .09
All dimensions are inches (centimeters) unless otherwise indicated.
Weight (shipping): 1.7 lbs. (0.77 kgs.)
10-1/8
3-3/4
(9.5)
5-3/8 (13.7)
14-5/8
3-3/4
(9.5)
2
(5.1)