Cut Sheet

LED EPANL 2X2
Catalog
Number
Notes
Type
FEATURES & SPECIFICATIONS
INTENDED USE  The EPANL Series LED Edge-Lit Flat Panel provides a fully luminous appearance
across the face of the lens. This provides a soft, glare-free solution that is visually comfortable
within the space. Suitable for many lighting applications including schools, offices and other
commercial spaces, retail, convenience stores, hospitals and healthcare facilities. Certain airborne
contaminants can diminish the integrity of acrylic and/or polycarbonate. Click here for
Acrylic-Polycarbonate Compatibility table for suitable uses.
CONSTRUCTION — Built to last with an aluminum frame for strength and durability, the seamless
frame prevents light leak in the corners. The satin white lens provides excellent shielding and fully
luminous appearance. EPANL's low-profile design provides increased installation flexibility especially
in restricted plenum spaces. The back plate includes integral T-bar clips for installation into 15/16”
T-grid ceilings. Clips for 9/16" T grid installation are available. See Accessories section on bottom of
page. This must be ordered as a separate item. Fixture may be mounted and wired in continuous rows.
ELECTRICAL  Long-life LEDs, coupled with a high-efficiency driver, provide superior illumination
for extended service life. 70% LED lumen maintenance at 60,000 hours (L70/60,000). 0-10V dimming
driver, dims to 10%.
LISTINGS  CCSA certified to meet US and Canadian standards. DesignLights Consortium® (DLC)
Premium qualified product. Not all versions of this product may be DLC Premium qualified. Please
check the DLC Qualified Products List at www.designlights.org/QPL to confirm which versions are
qualified. Damp location listed. IC rated. IP5X rated.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
EPANL LED
2' x 2'
2.19 in [55.50 mm]
23.70 in [602.00 mm]
ORDERING INFORMATION
Lead times will vary depending on options selected. Consult with your sales representative.
Example: EPANL 2X2 3400LM 80CRI 35K MIN10 ZT MVOLT
Series Lumens CRI Color Temperature Minimum Dimming Level Control Voltage
EPANL 2X2 2X2 LED
Flat Panel
3400LM 3400 nominal lumens 80CRI 80 CRI 35K 3500K
40K 4000K
MIN10 Dims to 10% ZT 0-10V Dimming
NPP16D nLight enabled
1,6
MVOLT 120-277V
347 347V
1
120 120V
277 277V
Emergency Options Options
E10WCP Power Sentry LED
Emergency battery pack
(T20 CEC Compliant)
2,3
CL80 Constant lumen output, 80%
4
PWS1836 6’ pre-wire, 3/8” diameter, 18 gauge, 1 circuit
PWS1846 6’ pre-wire, 3/8” diameter, 18 gauge, 2 circuit
PWS1846 PWSLV Two cables: one 6' pre-wire, 3/8” diameter, 18 gauge, 2 circuits; one 6' pre-wire, 3/8”
diameter, 18 gauge, purple and gray
5
PWS1856LV 6’ pre-wire, 3/8” diameter, 18 gauge, 1 circuit w/low voltage purple and grey wires
5
GLR Fast-blowing fuse
6
GMF Slow-blowing fuse
6
CP Chicago plenum
RRL_ RELOC®-ready luminaire
7
WPLT 54” x 54” pallet; doubles pallet QTY
23.70 in [602.00 mm]
23.70 in [602.00 mm]
23.70 in [602.00 mm]
0.50 in [12.60 mm]
2.19 in [55.50 mm]
8.20 in [208.24 mm]
9.31 in [236.59 mm]
23.70 in [602.00 mm]
23.70 in [602.00 mm]
2.19 in [55.50 mm]
23.70 in [602.00 mm]
Ø0.24 in [6.00 mm] SUSPENSION OPTION LOCATIONS4x
Accessories: Order as separate catalog number.
DGA22 Drywall grid adapter for 2x2 recessed fixture.
PS1055CP FMC BRKT Power Sentry emergency constant power battery pack field
installation kit (T20 CEC Compliant).
2
2X2SMK 2'x2' Surface Mount Troffer Kit
EPANL TGRID CLIP J4 Pack of 4 grid clips for 9/16" T grid compatibility.
EPANL TGRID CLIP J50 Pack of 50 grid clips for 9/16" T grid compatibility.
Notes
1 Not available with emergency options.
2 When using pre-wire option, use
PWS1846 or PWS1846 PWSLV.
3 Please refer to Emergency Battery
Estimated Lumen section for lumen
estimation.
4 Requires NLIGHT.
5 Not available with nLight wired/wireless
network or individual controls.
6 Requires specific voltage.
7 For ordering logic consult RRL_2013.
Emergency Battery Estimated Lumens
Use the formula below to estimate the
delivered lumens in emergency mode
Estimated Lumens = 1.25 x P x LPW
P = Output power of emergency driver
(10W for PS1050DL)
LPW = Lumen per watt rating of the
luminaire.
REXEL LIGHTING MAGAZINE 2.0
6/7/2018 Acuity Brands
1115074 / LIT EPANL-22-34L-35K 2X2 FULLY