Specification Sheet

One Lithonia Way, Conyers, GA 30012 | 800-705-SERV (7378) | [e-mail] | www.lithonia.com
© 2019 Acuity Brands Lighting, Inc. All rights reserved. Rev. 11/12/19
Page 2 of 2
CONTRACTOR SELECT ELM2L
3.10 [7.87]
9.72 [24.69]
9.15 [23.24]
4.68 [11.88]
3.10 [7.87]
INTENDED USE:
Provides a minimum of 90 minutes illumination for the rated wattage upon loss of AC power
to meet and exceed code required emergency lighting. Ideal for applications requiring
attractive LED unit equipment with quick installation and unparalleled performance for lower
mounting heights.
CONSTRUCTION:
The housing is a standard white thermoplastic with a compact and low-prole contemporary
design. It is 5VA ame rated, impact-resistant, scratch-resistant and corrosion proof. The
UV-stable resin resists discoloration from natural and man-made light sources. The back-plate
contains a universal j-box mounting pattern to facilitate ease of installation on a wide variety
of j-boxes and the front housing allows tool-less access for ease of maintenance.
OPTICS:
The typical life of the LED is 10 years. Two 1.2W LED Lamps.
ELECTRICAL:
Orderable in multiple voltages. Emergency unit provided with test switch, status indicator and
rechargeable battery. Sealed, maintenance-free nickel-cadmium or Lithium Iron Phosphate
battery provides at least 90 minutes of emergency power.
INSTALLATION:
Wall and ceiling mount. Tool-less removal of front cover from back-plate for ease of
installation and maintenance.
LISTINGS:
UL damp location listed standard and wet location listed when used with the WPVS accessory,
all at 50-104°F (10-40°C). Meets or exceeds all applicable requirements for UL 924, NFPA 101
(current Life Safety Code), NFPA 70 (NEC), NOM (Norma Ocial Mexicana), California Energy
Commission Title 20 section 1605.3 (W)(4), FCC Title 47, Part 15, Subpart B and OSHA. List
and labeled to comply with Canadian Standards C22.2 No. 141-10.
WARRANTY:
5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/customer-support/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
Length: 9.72 (24.69)
Depth: 3.10 (7.87)
Height: 4.68 (11.88)
Weight: 1.31lbs (0.59kg)
All dimensions are inches (centimeters)
unless otherwise indicated.
Maximum Spacing Guidelines — ELM2L
Mounting
Height
Illumination
Level
Single Luminaire
Coverage
Multiple Luminaire
Spacing
Application
Notes
3' Path of
Egress
6' Path of
Egress
3' Path of
Egress
6' Path of
Egress
7.5' 1FC Avg
1
32' 24' 35' 28'
100' Corridor,
8' wide, and
12' high with
80/50/20
reflectances
10' 1FC Avg
1
20' 14' 27' 23'
Notes:
1. Also meets the additional illumination requirements of NFPA 101: 1FC minimum and max/min ratio
of 40:1.
*Note: To see complete photometric report or download the .ies file for this product,
visit Lithonia Lighting ELM2L home page.
Example of single ELM2L illuminating a 3' path
of egress.
* Application image examples are using LP220L lamp.
Example of multiple
ELM2L luminaires
illuminating a 3' path
of egress.
32'
1 FC average
3'
7.5'
3'
35'
1 FC average
Spacing guidelines