Specification

Options and Accessories
One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone] • Fax: [phone] • www.lithonia.com
© 2013-2016 Acuity Brands Lighting, Inc. All rights reserved.
DSXWPM-LED
Rev. 02/22/16
FEATURES & SPECIFICATIONS
INTENDED USE
The energy savings, long life and easy-to-install design of the D-Series Pole Mount
make it the smart choice for area and site illumination for nearly any facility.
CONSTRUCTION
Two-piece die-cast aluminum housing has integral heat sink fins to optimize thermal
management through conductive and convective cooling. Modular design allows
for ease of maintenance. The LED driver is mounted to the door to thermally isolate
it from the light engines for low operating temperature and long life. Housing is
completely sealed against moisture and environmental contaminants (IP65).
FINISH
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset
powder coat finish that provides superior resistance to corrosion and weathering. A
tightly controlled multi-stage process ensures a minimum 3 mils thickness for a finish
that can withstand extreme climate changes without cracking or peeling. Available
in textured and non-textured finishes.
OPTICS
Precision-molded proprietary acrylic lenses provide multiple photometric
distributions tailored specifically to area lighting applications. Light engines are
available in 3000K, 4000K or 5000K with 70 min. CRI configurations.
ELECTRICAL
Light engine(s) consist of 10 high-efficacy LEDs mounted to a metal-core circuit
board to maximize heat dissipation and promote long life (L88/100,000 hrs at 25°C).
Class 1 electronic drivers have a power factor >90%, THD <20%, and a minimum
6KV surge rating. The luminaire meets a minimum Category C Low (per ANSI/IEEE
C62.41.2).
INSTALLATION
Includes universal mounting plate, which utilizes existing drill patterns and
allows for quick and easy installation. Stainless steel bolts fasten the mounting
block securely to poles.
LISTINGS
CSA certified to U.S. and Canadian standards. Rated for -40°C minimum
ambient.
DesignLights Consortium
®
(DLC) qualified product. Not all versions of this
product may be DLC qualified. Please check the DLC Qualified Products List at
www.designlights.org to confirm which versions are qualified.
WARRANTY
Five-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Actual performance may differ as a result of end-user environment and
application.
All values are design or typical values, measured under laboratory conditions
at 25 °C.
Specifications subject to change without notice.
Mounting detail ASYDF - Asymmetric diffuse (left en-
gine is T3M, right engine is diffused)
HS - House-side shields BSW - Bird-deterrent spikes
WG - Wire guard VG - Vandal guard DDL - Diffused drop lens