Specification

DSXW1 LED
Series LEDs Drive Current Color temperature Distribution Voltage Mounting Control Options
DSXW1 LED 10C 10 LEDs
(one
engine)
20C 20 LEDs
(two
engines)
350 350 mA
530 530 mA
700 700 mA
1000 1000 mA
(1 A)
30K 3000 K
40K 4000 K
50K 5000 K
AMBPC Amber
phosphor
converted
T2S Type II Short
T2M Type II Medium
T3S Type III Short
T3M Type III Medium
T4M Type IV Medium
TFTM Forward Throw
Medium
ASYDF Asymmetric
diffuse
MVOLT
1
120
1
208
1
240
1
277
1
347
2
480
2
Shipped included
(blank) Surface
mounting
bracket
BBW Surface-
mounted
back box
(for conduit
entry)
3
Shipped installed
PE Photoelectric cell, button type
4
DMG 0-10V dimming driver (no controls)
PIR 180° motion/ambient light sensor, <15’ mtg ht
5
PIRH 180° motion/ambient light sensor, 15-30’ mtg ht
5
PIR1FC3V Motion/ambient sensor, 8-15' mounting height, ambi-
ent sensor enabled at 1fc
5
PIRH1FC3V Motion/ambient sensor, 15-30' mounting height,
ambient sensor enabled at 1fc
5
ELCW Emergency battery backup (includes external compo-
nent enclosure)
6
Other Options Finish (required)
Shipped installed Shipped separately
8
SF Single fuse (120, 277 or 347V)
7
BSW Bird-deterrent spikes
DF Double fuse (208, 240 or 480V)
7
WG Wire guard
HS House-side shield
8
VG Vandal guard
SPD Separate surge protection
9
DDL Diffused drop lens
DDBXD Dark bronze DSSXD Sandstone DWHGXD Textured white
DBLXD Black DDBTXD Textured dark bronze DSSTXD Textured sandstone
DNAXD Natural aluminum DBLBXD Textured black
DWHXD White DNATXD Textured natural aluminum
D-Series Size 1
LED Wall Luminaire
Ordering Information
EXAMPLE: DSXW1 LED 20C 1000 40K T3M MVOLT DDBTXD
NOTES
1 MVOLT driver operates on any line voltage from 120-277V (50/60 Hz). Specify 120, 208, 240 or 277 options only when ordering with fusing (SF, DF
options), or photocontrol (PE option).
2 Only available with 20C, 700mA or 1000mA. Not available with PIR or PIRH.
3 Back box ships installed on fixture. Cannot be field installed. Cannot be ordered as an accessory.
4 Photocontrol (PE) requires 120, 208, 240, 277 or 347 voltage option. Not available with motion/ambient light sensors (PIR or PIRH).
5 PIR and PIR1FC3V specifies the Sensor Switch SBGR-10-ODP control; PIRH specifies the Sensor Switch SBGR-6-ODP control; see Motion Sensor Guide
for details. Includes ambient light sensor. Not available with “PE” option (button type photocell). Dimming driver standard. Not available with 20
LED/1000 mA configuration (DSXW1 LED 20C 1000).
6 Cold weather (-20C) rated. Not compatible with conduit entry applications. Not available with BBW mounting option. Not available with fusing. Not
available with 347 or 480 voltage options. Emergency components located in back box housing. Emergency mode IES files located on product page at
www.lithonia.com
7 Single fuse (SF) requires 120, 277 or 347 voltage option. Double fuse (DF) requires 208, 240 or 480 voltage option. Not available with ELCW.
8 Also available as a separate accessory; see Accessories information.
9 See the electrical section on page 3 for more details.
Catalog
Number
Notes
Type
Accessories
Ordered and shipped separately.
DSXWHS U House-side shield (one per
light engine)
DSXWBSW U Bird-deterrent spikes
DSXW1WG U Wire guard accessory
DSXW1VG U Vandal guard accessory
One Lithonia Way • Conyers, Georgia 30012 • Phone: [phone] • www.lithonia.com
© 2013-2016 Acuity Brands Lighting, Inc. All rights reserved.
Hit the Tab key or mouse over the page to see all interactive elements.
Introduction
The D-Series Wall luminaire is a stylish, fully
integrated LED solution for building-mount
applications. It features a sleek, modern design
and is carefully engineered to provide long-lasting,
energy-efficient lighting with a variety of optical
and control options for customized performance.
With an expected service life of over 20 years of
nighttime use and up to 74% in energy savings
over comparable 250W metal halide luminaires,
the D-Series Wall is a reliable, low-maintenance
lighting solution that produces sites that are
exceptionally illuminated.
Luminaire
Width:
13-3/4”
(34.9 cm)
Depth:
10”
(25.4 cm)
Height:
6-3/8”
(16.2 cm)
Back Box (BBW, ELCW)
Width:
13-3/4”
(34.9 cm)
Depth:
4”
(10.2 cm)
Height:
6-3/8”
(16.2 cm)
For 3/4” NPT side-entry
conduit (BBW only)
Specifications
Weight:
12 lbs
(5.4 kg)
BBW
Weight:
5 lbs
(2.3 kg)
ELCW
Weight:
10 lbs
(4.5 kg)
D
H
W
4
13-3/4
6-3/8
FOR 3/4" NPT
SIDE-ENTRY CONDUIT
3-PLACES (BBW ONLY)
D
H
4
13-3/4
6-3/8
FOR 3/4" NPT
SIDE-ENTRY CONDUIT
3-PLACES (BBW ONLY)
W