Instructions / Assembly

Never connect components under load.
Do not mount or support these xtures in a manner that can cut the outer jacket or damage wire insulaon.
Unless individual product specicaons deem otherwise: Never connect an LED product directly to a dimmer packs,
occupancy sensors, ming devices, or other related control devices. LED xtures must be powered directly o a switched
circuit.
Unless individual product specicaons deem otherwise: Do not restrict xture venlaon. Allow for some volume of
airspace around xture. Avoid covering LED xtures with insulaon, foam, or other material that will prevent convecon
or conducon cooling.
Unless individual product specicaons deem otherwise: Do not exceed xtures maximum ambient temperature.
Only use xture in its intended locaon.
LED products are Polarity Sensive. Ensure proper Polarity before installaon.
Electrostac Discharge (ESD): ESD can damage LED xtures. Personal grounding equipment must be worn during all
installaon or servicing of the unit.
Do not touch individual electrical components as this can cause ESD, shorten lamp life, or alter performance.
Some components inside the xture may not be serviceable. In the unlikely event your unit may require service, stop
using the unit immediately and contact an ABL representave for assistance.
Always read the xtures complete installaon instrucons prior to installaon for any addional xture specic warnings.
CAUTION: RISK OF PRODUCT DAMAGE
Please see product specic installation instructions for additional warnings or any applicable FCC or other regulatory statements.
Failure to follow any of these instructions could void product warranties. For a complete listing of product Terms and Conditions, please visit www.acuitybrands.com.
Our Brands Indoor/Outdoor Indoor Lighting Outdoor Lighting Controls Daylighting
Lithonia Lighting Gotham American Electric Lighting DARK TO LIGHT SunOptics
Carandini Mark Architectural Lighting Antique Street Lamps LC&D
Holophane Peerless Hydrel ROAM
RELOC Renaissance Lighng Tersen Sensor Switch
Light Concepts Winona Lighting Synergy
Acuity Brands Lighting, Inc. assumes no responsibility for claims arising out of improper or careless installation or handling of its products.
ABL LED General Warnings, Form No. 503.203
© 2010 Acuity Brands Lighting, Inc. All rights reserved. 12/01/10