Specification
FEATURES & SPECIFICATIONS
  INTENDED USE 
The sleek design of the D-Series Size 2 Flood reects the embedded high performance LED 
technology. It is ideal for larger signage, facade and agpole lighting in many commercial and 
residential applications.
  CONSTRUCTION 
Die-cast aluminum housing has integral heat sink ns to optimize thermal management through 
conductive and convective cooling. The LED driver is mounted in direct contact with the casting to 
promote low operating temperature and long life. Housing is completely sealed against moisture 
and environmental contaminants (IP65). Low EPA (0.8 ft
2
) for optimized wind loading.
  FINISH 
Exterior parts are protected by a zinc-infused Super Durable TGIC thermoset powder coat nish 
that provides superior resistance to corrosion and weathering. A tightly controlled multi-stage 
process ensures a minimum 3 mils thickness for a nish that can withstand extreme climate 
changes without cracking or peeling. 
  OPTICS 
A variety of precision-molded vacuum-metallized specular reectors are engineered for superior 
eld-to-beam ratios, uniformity and spacing. Light engines are available in 3000K (70 CRI min.), 
4000K (70 CRI min.) or 5000K (70 CRI min.) congurations. Optional visors offer additional 
versatility.
  ELECTRICAL 
Light engine(s) consist of chip-on-board (COB) LEDs directly coupled to the housing to 
maximize heat dissipation and promote long life (100,000 hrs, L80). Class 1 electronic driver 
has a power factor >90%, THD <20%, and has an expected life of 100,000 hours with <1% 
failure rate. Surge protection meets a minimum Category C Low operation (per ANSI/IEEE 
C62.41.2). 
  INSTALLATION 
Integral adjustable knuckle with 1/2-14 NPS threaded pipe, tenon sliptter, or yoke 
mounting, facilitates quick and easy installation to a variety of mounting accessories. This 
secure connection enables the D-Series Size 2 to withstand up to a 1.5 G vibration load rating 
per ANSI C136.31. 
 LISTINGS 
CSA certied to U.S. and Canadian standards. Luminaire is IP65 rated. Rated for -40°C 
minimum ambient. 
  DesignLights Consortium® (DLC) qualied product. Not all versions of this product may 
be DLC qualied. Please check the DLC Qualied Products List at www.designlights.org to 
conrm which versions are qualied.
  WARRANTY 
Five year limited warranty. Full warranty terms located at www.acuitybrands.com/
CustomerResources/Terms_and_conditions.aspx.
 Note: Specications subject to change without notice.
One Lithonia Way • Conyers, Georgia 30012 • Phone: 800.279.8041 • Fax: 770.918.1209 • www.lithonia.com
© 2012-2014 Acuity Brands Lighting, Inc. All rights reserved.
DSXF2-LED
Rev. 10/02/14



