Specification

FEATURES & SPECIFICATIONS
INTENDED USE
Provides general illumination in residential and light commercial applications. Ideal for use in offices and all
rooms in the home. If required for commercial application or operation more than eight (8) hours
per day, consult factory for available options.
CONSTRUCTION
Decorative contoured distinctive linear design complements a variety of decors. Durable, milk white acrylic
diffuser provides wide spread, uniform illumination and allows easy access for cleaning and maintenance.
Available in four sizes: 1’x4’, 1-1/2’x2’, 2’x2’, or 1-1/2’x4.
OPTICS
Utilizes (2) or (4) linear T8 fluorescent lamps for energy efficiency, superior color rendering and long life
(not included).
ELECTRICAL
Standard with electronic ballast (120 volt, 60 Hz) ensures no flickering and quiet operation without
interfering with other electronics. Also available in other ballast configurations.
For use with non-dimmable switches only.
INSTALLATION
All mounting hardware included.
LISTINGS
UL Listed to US and Canadian safety standards. For non-RE ballast fixtures, UL (standard) and for CSA
certified (see options).
WARRANTY
2-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
Specifications subject to change without notice.
Series
1,2
Residential ballast
4
Lamp
5
Ballast/Voltage
7
Options
10640 1’x4’ - (2) 32W linear T8 lamps
10641 1-1/2’x2’ - (4) 17W linear T8 lamps
10651 2’x2’ - (2) 31W T8 U-lamps
3
10642 1-1/2’x4’ - (4) 32W linear T8 lamps
(blank) Other voltage and ballast types
available (see ballast/voltage)
RE 120 volt residential electronic
ballast (standard)
(blank) RE ballast fixtures only
Non-RE ballast fixtures only
17 17W T8 (2’ fixtures only)
U31 31W T8-U (1-5/8” leg)
6
U316 31W T8-U (6” leg)
6
32 32W T8 (4’ fixtures only)
(blank) RE ballast
fixtures only
MVOLT Multi-volt
120 120V
277 277V
347 347V
Others available. Consult factory.
GEB Electronic ballast, <20%THD
GEB10IS T8 electronic ballast, <10%
THD, instant start
GEB10RS T8 electronic ballast, 10% THD,
rapid start
CSA CSA Certified
8
Consult factory for other options and accessories
ORDERING INFORMATION
For shortest lead times, configure products using bolded options.
Example: 10640 32 MVOLT GEB
Replacement Parts: Order as separate catalog number.
DPUFF 1’ x 4’ white acrylic diffuser
D15PUFF2 1-1/2’ x 2’ white acrylic diffuser
D2PUFF2 2’ x 2’ white acrylic diffuser
D15PUFF 1-1/2’ x 4’ white acrylic diffuser
Indoor General Purpose
Litepuff
Linear Flush Mount
Linear T8 Fluorescent
DIMENSIONS
Nominal
size
Lamp
configuration
Model
number Number of lamps
(A) Width
inches (cm)
(B) Length
inches (cm)
(C) Extension
inches (cm)*
1' x 4' 10640 (2) 32W Linear T8 11-1/4" (28.6) 51-1/2" (130.8) 5-1/2" (14.0)
1-1/2’ x 2’
10641 (4) 17W Linear T8 16-5/8" (42.2) 27-1/2" (69.5) 5-1/2" (14.0)
2’ x 2’
10651 (2) 31W Linear T8 27" (68.6) 27-3/8" (69.5) 5-1/2" (14.0)
1-1/2’ x 4'
10642 (4) 32W Linear T8 16-5/8" (42.2) 51-1/2" (130.8) 5-1/2" (14.0)
*Extension from ceiling.
All dimensions are inches (centimeters) unless otherwise indicated.
Notes
1 Lamps not included.
2 Use with non-dimmable switches only.
3 Lamp configuration for RE fixtures is standard U316.
4 Residential electronic ballast standard and requires RE designation.
5 No designation for lamp type is required on RE ballast fixtures.
6 Only available with 2’x2’ fixtures (Also can be ordered on REballast 2x2 fixtures).
7 No designation for ballast/voltage type is required on RE ballast fixtures.
8 CSA standard on RE ballast fixtures.
DECORATIVE INDOOR PUFL
Catalog
Number
Notes
Type
(A)
(B)
(C)