Cut Sheet

FEATURES & SPECIFICATIONS
INTENDED USE
Provides task or accent illumination in residential and light commercial applications. Ideal for use under
cabinets oering shadow-free lighting in kitchens and work areas, in bookcases, display cabinets or above
cabinets setting a warm, inviting atmosphere in the kitchen. If required for commercial application or
operation more than eight (8) hours per day, consult factory for available options.
CONSTRUCTION
Rugged post painted housing with snap on/o hinged service tray for quick installation and wiring.
Shatter-resistant, acrylic white diuser provides soft widespread illumination with zip-lock design for easy
lamp access, cleaning and superior retention. Available in four lengths, can be ordered with or without on/
o rocker switch.
OPTICS
Utilizes linear T12 lamps for superior color rendering and long life (not included).
ELECTRICAL
Standard with magnetic ballast, trigger start on 18” and 24” lengths, rapid start on 36” and 48” lengths (120
volt, 60Hz). Use with non-dimmable switches only.
INSTALLATION
All mounting hardware included.
LISTINGS
UL listed to US and Canadian safety standards and suitable for damp locations.
WARRANTY
1-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Actual performance may dier as a result of end-user environment and application.
Note: Specications subject to change without notice.
Series
1,2,3
Voltage Cord & Plug Rocker Switch Options
2UC 15 18” - (1) 15W linear T12 uorescent lamp required
4
2UC 20 24” - (1) 20W linear T12 uorescent lamp required
4
2UC 30 36” - (1) 30W linear T12 uorescent lamp required
5
2UC 40 48” - (1) 40W linear T12 uorescent lamp required
5
120 120V ballast (standard)
Other voltage and ballast types
(Consult factory)
(blank) No cord and plug
CSW Cord and plug included
(blank) No switch
SWR Rocker switch
6
(Available 18” and 24” trigger start ballast
and 36” and 48” rapid start ballast only).
NOM NOM Certied
(Consult factory for other options)
ORDERING INFORMATION
For shortest lead times, congure products using bolded options.
Example: 2UC 15 120 SWR
Replacement Parts: Order as separate catalog number.
D2UC18 18” white acrylic diuser
D2UC24 24” white acrylic diuser
D2UC36 36” white acrylic diuser
D2UC48
48” white acrylic diuser
Indoor General Purpose
Cabinet Light
Direct Wire - T12
Linear T12 Fluorescent
DIMENSIONS
Nominal
size
Lamp
conguration
Model
number Number of lamps
(A) Width
inches (cm)
(B) Length
inches (cm)
(B) Extension
inches (cm)*
18” 18" 2UC 15 (1) 15W linear T12 5-1/4" (13.3) 18-1/4" (46.3) 1-3/4" (4.5)
24” 24" 2UC 20 (1) 20W linear T12 5-1/4" (13.3) 24-1/2" (62.2) 1-3/4" (4.5)
36”
36" 2UC 30 (1) 30W linear T12 5-1/4" (13.3) 36-1/4" (92.0) 1-3/4" (4.5)
48”
48" 2UC 40 (1) 40W linear T12 5-1/4" (13.3)
48-1/4"
(123.2)
1-3/4" (4.5)
*Extension from ceiling.
All dimensions are inches (centimeters) unless otherwise indicated.
Notes
1 Lamps not included.
2 Use with non-dimmable switches only.
3 Maximum quantity of cabinet xtures that can be connected from a single
power source can not exceed 540 watts from the lamp wattage.
4 Magnetic Trigger Start ballast only.
5 Magnetic Rapid Start ballast only.
DECORATIVE INDOOR 12GU
Catalog
Number
Notes
Type
(A)
(B)
(C)