Installation Guide

Page 3 of 8
912-00235-001 Rev. B
LED IMPORTANT SAFETY INSTRUCTIONS
FIXTURE PACKING LIST
ITEM DESCRIPTION QTY
1. Lens 1
2. Housing 1
3. Mounting Bracket 2
4. Lens Latch 10(4FT) 20(8FT)
5. Wet Location Fitting 1
6. LED tray 1(4ft) 2(8ft)
7. Led Driver 1
8. CCT/INT Switch 1(certain models)
Installation Instructions - CSVT
Contractor Single Strip Vapor-Tite
LED Luminaire
When handling the fixture during unpacking and installation take precautions of the plastic Lens and
plastic end caps. Dropping the fixture or excess force on the lens or housing can cause damage.
Removing the lens from the housing during installation exposes the LED’s and puts them at risk for
damage. Damage to the LEDs caused during installation will not be covered under the warranty.
TOOLS REQUIRED
FOR INSTALLATION
•Safety glasses •Drill
•Ruler/Tape measure •3/32” Drill Bit
•Flat blade screwdriver •1/2” Drill Bit
•Phillips screwdriver •7/8” Drill Bit
•Adjustable wrench •Pliers
Protect yourself. Before installing,
read these instructions carefully and
save them for future reference.
Date Installed: _______________