Warranty Guide
DOWNLIGHTING 65BE LED
FEATURES & SPECIFICATIONS
INTENDED USE — Our recessed LED module is the most economical means to create a well lit environ-
ment with exceptional energy efficiency and near zero maintenance. Great for retrofit into existing
downlight cans or new construction and remodel applications. Adjustable torsion spring and retention
allows fitment into many 5" and 6" cans. The LED module maintains at least 70% light output for 50,000
hours. Indoor and Outdoor Use.
CONSTRUCTION — Aluminum spun reflector with deep baffle configuration for reduced glare.
Combined LED and driver printed circuit board attached. Inner reflector cone funnels light through the
pressed-in diffused lens.
OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumina-
tion, equivalent to 65W BR30 lamp.
Wide flood beam angle at >45°.
ELECTRICAL — Center 2 Edge™ (patent pending) technology created for a single point source. Primary
power disconnect provided for simple connection to a dedicated LED connector in the housing.
Dimming down to 10%. For compatible dimmers, please refer to the charts below.
711L-lumen E series has an input wattage of 11.9 watts, 60 lumens per watt, equivalent to 65-watt
incandescent.
E Series’ patent pending driver has zero inrush, which allows power loads to be calculated with actual
rated wattages.
Example: 54 units of 65BEMW LED fixtures can be installed in line with a 600-watt dimmer. 600W/11.9W
= 54 fixtures.
INSTALLATION Suitable for installation in standard and shallow-height rough-in sections.
E26 socket adapter ships standard.
Twin torsion springs ensure easy installation for 5" and 6" recessed housings.
LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® qualified. Wet location
listed. WSEC ASTM E283 for Air-Tight (with IC housings).
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
PATENTS PENDING.
5-5/8
(14.3)
2-3/
4
(7.1)
7-5/8
(19.4)
Specifications
Aperture: 5-5/8 (14.3)
Ceiling opening: Determined by rough-in
Overlap trim: 7-5/8 (19.4)
Height: 2-3/4 (7.1)
LED Recessed Downlighting
65BE
5" / 6" LED Module
IC/Non-IC
Retrofit
D
I
M
M
A
B
L
E
E26 adaptor
(included)
All dimensions are inches (centimeters) unless otherwise indicated.
Notes
1 Total system delivered lumens.
2 Must be ordered on a separate line.
ORDERING INFORMATION
For shortest lead times, configure product using bolded options.
Example: 65BEMW LED 27K L7XLED T24
Series/Finish Lamp CCT / CRI / W / Lumens
1
Voltage Housing options
65BEMW 5" / 6" Baffle LED module,
matte white
LED
HL LED
27K 2700 K/ 82CRI / 11.9W / 640L
30K 3000 K/ 82CRI / 11.9W / 687L
40K 4000K /82CRI/11.9W/711L
50K 5000K/81CRI/10.6W/780L
27K 90CRI 2700 K / 93 CRI / 10.3W / 650L
30K 90CRI 3000 K / 93 CRI / 10.2W/733L
40K 90CRI 4000 K / 93 CRI / 10.3W/808L
27K 2700K/80CRI/11.7W/1090L
30K 3000K/80CRI/11.9W/1100L
40K 4000K/80CRI/11.9W/1110L
(blank) 120V L7XLED T24 6" new construction rough-in LED base
L7XRLED T24 6" remodel rough-in LED base
LC6LED T24 6" new construction rough-in LED base
L7X 6" new construction rough-in
2
L7XR 6" remodel rough-in
2
L7XP 6" new construction shallow rough-in
2
L7XPR 6" remodel shallow rough-in
2
LC6 6" new construction rough-in
2
LCP 6" new construction shallow rough-in
2
L5LED T24 5" new construction rough-in LED base
L5RLED T24 5" remodel rough-in LED base
L5 5" new construction rough-in
2
L5R 5" new construction rough-in
2
Accessories: order as separate catalog number
TSA6 6" torsion spring adaptor
Catalog
Number
Notes
Type