Specification

®
SPECIFICATIONS
ORDERING INFO
OPTIONS
OCCUPANCY CONTROLLED
DIMMING (D)
• Provides dimming output to control
0-10 VDC dimmable ballasts
• Provides a second occupancy time-out
period that enables the lights to go to a
dim setting before turning off
• Adjustable max/min dim setting
PHOTOCELL (P)
• Auto set-point calibration
• Two selectable modes of operation
• On/Off mode: Photocell has full control
during periods of occupancy
• Inhibit mode: Photocell can prevent
lights from turning on if adequate
daylight is available, but cannot turn
lights off
PHOTOCELL w/ DIMMING (ADC)
• Photocell within sensor maintains total
room light level by controlling levels of
0-10 VDC dimmable ballasts
• Photocell also has full on/off control
during periods of occupancy
• Provides a second occupancy time-out
period that enables the lights to go to a
dim setting before turning off
Note: LampMaximizer+ features not
available with ADC option
347 VAC (347)
• Allows sensor to be powered from
and switch 347 VAC
LOW TEMP/HIGH HUMIDITY (LT)
• Sensor electronics are coated for
corrosion resistance
• Operates down to -40º F/C)
• Required for cooler/freezer applications
OVERVIEW
The CMR 9 Series Standard Range 360°
occupancy sensor incorporates Passive Infrared
(PIR) detection technology into an attractive
line powered occupancy sensor that provides
amazing sensitivity to small motions (e.g.
hand movements) and excellent payback. The
CMR 9 is an economical solution for providing
automatic lighting control where a wall switch
replacement sensor is not applicable. With an
integrated line switching relay, the CMR 9 is
perfect for applications where locating a power
pack is difcult, such as retrotting rooms with
concrete or inaccessible ceilings. For rooms with
obstructions, the CMR PDT 9 Series sensor is
recommended.
SENSOR OPERATION
The sensor detects changes in the infrared
energy given off by occupants as they move
within the eld-of-view. When occupancy is
detected, a self-contained relay switches the
connected lighting load on. The sensor is line
powered, switches line voltage, and requires no
eld calibration or sensitivity adjustments.
LAMPMAXIMIZER
®
This sensor also contains patented
LampMaximizer technology that allows users
to aggressively target energy savings while still
protecting lamp life. A minimum on timer, factory
set at 15 minutes, helps preserve lamp life by
eliminating all lamp cycles shorter than lamp
manufacturers’ recommendations.
A standard occupancy time delay is also present
that ensures lights turn off (assuming minimum on
timer has elapsed) if no occupancy is detected.
This timer is factory set at 10 minutes to promote
energy savings, but is adjustable between 30
seconds and 20 minutes. These adjustments
can be done manually, through the units push-
button, or automatically every two weeks through
an advanced mode, called LampMaximizer+,
that determines the optimum time delay in order
to maximize both lamp life and energy savings.
Additionally, this sensor maintains statistics on
total lamp on time and number of cycles.
STANDARD RANGE 360º SENSOR
CEILING MOUNT • LINE VOLTAGE • PASSIVE INFRARED (PIR)
CMR 9
FEATURES
100% Digital PIR Detection,
Excellent RF Immunity
360º Coverage Pattern
Self-Contained Relay,
No Power Pack Needed
No Minimum Load Requirements
Interchangeable Hot & Load Wires,
Impossible to Wire Backwards
Push-Button Programmable
Adjustable Time Delays
No Field Calibration or Sensitivity
Adjustments Required
Convenient Test Mode
100 hr Lamp Burn-in Timer
Green LED Indicator
LAMPMAXIMIZER
®
TECHNOLOGY
• Protects Lamp Life while
Maximizing Energy Savings
• Minimum On Timer (15 min default)
• Occ. Time Delay (10 min defatult)
• LampMaximizer+ Mode -
Optimizes Lamp Life & Energy
Savings (disabled by default)
• Switch Counter (in 1000’s)
• Total Lamp On Time (in khrs)
PHYSICAL SPECS
SIZE 4.55” Dia. (11.56 cm)
1.55” Deep (3.94 cm)
WEIGHT 6 oz
MOUNTING 3.5” Octagon Box
Single Gang Handy Box
COLOR White
ELECTRICAL SPECS
MAXIMUM LOAD
800 W @ 120 VAC
1200 W @ 277 VAC
1500 W @ 347 VAC
MINIMUM LOAD None
MOTOR LOAD 1/4 HP
FREQUENCY 50/60 Hz
DIMMING LOAD Sinks < 20mA;
~40 Ballasts @ .5mA each
ENVIRONMENTAL SPECS
OPERATING TEMP
14º to 160º F (-10º to 71º C)
STORAGE TEMP
-14º to 160º F (-26º to 71º C)
RELATIVE HUMIDITY
20 to 90% non-condensing
SILICONE FREE
ROHS COMPLIANT
VOLTAGE
TEMP/HUMIDITY
Blank = None Blank = 120/277 VAC Blank = Standard
D = Occupancy Controlled Dimming 347 = 347 VAC LT = Low Temp
P = Photocell
ADC = Photocell w/ Dimming
CMR 9 [DIMMING/PHOTOCELL] [VOLTAGE] [TEMP/HUMIDITY]
DIMMING / PHOTOCELL CHOOSE ONE ONLY
C US LISTED
TITLE 24
ASSEMBLED in U.S.A.
5 YEAR WARRANTY