Installation Sheet

Page 7 of 11
U351 Rev. A
LED IMPORTANT SAFETY INSTRUCTIONS
SECTION E: INSTALLATION – CLX HANGER MOUNT (THCLX)
1) Attach CLX brackets to structure. If mounting to a T-Grid snap Mounting bracket into T-Grid as shown below. Two CLX brackets
MUST be used for standalone fixtures. If mounting in a continuous row one bracket per fixture with one additional bracket per row
must be used at a minimum
2) Snap Fixture into the THCLX mounting bracket. Ensure fixture is fully engaged into the THCLX bracket, as shown below.
4) Follow steps 2-9 from the suspended mount instructions
4) Use supplied hardware to tighten THUN brackets around center channel as shown below. Tighten bolts to 13 in/lbs.
Installing THCLX to T-GRID Installing THCLX to fixture
THCLX
DO NOT TIGHTEN BEFORE
INSTALLING FIXTURE
THCLX
DRIVER
CHANNEL
T-grid
Ensure mounting
bracket is fully
engaged with the
driver channel