Specification

Page 1 of 14
FEATURES & SPECIFICATIONS
INTENDED USE — The CLX is a linear lighting solution that is available in multiple lengths, lumen
packages and distributions. Designed for versatility, the CLX can address virtually any indoor lighting
need. The CLX is also offered in standard and high efficacy configurations and capable of being continuous
row mounted or installed as a stand-alone fixture. Ideal for uplight and downlight in commercial,
retail, manufacturing, warehouse, and display applications. Certain airborne contaminants can
diminish the integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate
Compatibility table for suitable uses.
CONSTRUCTION — Channel and cover are formed from code-gauge cold-rolled steel. Housing and
lens endcaps are injection molded plastic to provide a more architectural look and feel. The endcaps
come standard with a 7/8" knock out for continuous mounting but can be ordered without.
Finish: Paint options include high-gloss, baked white polyester (WH), galvanized (GALV), matte
black (MB) and smoke gray (SKGY). Five-stage iron phosphate pre-treatment ensures superior paint
adhesion and rust resistance.
OPTICS — Offered with acrylic lens and less lens configurations. Provides a choice of optical
distributions including, wide, narrow, and aisle.
ELECTRICAL — Utilizes high-output LEDs integrated on a two-layer circuit board, ensuring cool-
running operation. Optional internal pluggable wiring harness for reduced labor cost in row mounting
applications. (See PLR_ ordering information on page 14.) Electronic LED driver is multi-volt input and
0-10V dimming standard (see Operational Data on page 12 for actual wattage consumption). This fixture
is designed to withstand a maximum line surge of 2.5kV at 0.75kA combination wave for indoor locations,
for applications requiring higher level of protection additional surge protection must be provided.
L70>100,000 hours at 25˚C.
LEDs provide nominal 80 CRI or 90 CRI at 3000 K, 3500 K,4000 K, or 5000 K.
Lumen output up to 2,500 lumens per foot.
INSTALLATION — Fixture may be ceiling or wall mounted (with or without THCLX hanger or angle
mounted with CLXANGBRT), pendant or stem mounted with appropriate mounting options.
WARNING — Removing the lens and opening the fixture during installation exposes the LEDs, putting
them at risk for damage.
If you plan to surface mount the fixture, we recommend using the THCLX. This eliminates the need to
open the fixture.
If you plan to continuous row mount, we recommend using the PLR wiring harness option. This eliminates
the need to open the fixture.
Damage to the LEDs caused during installation will not be covered under the warranty.
LISTINGS — CSA certified to US and Canadian safety standards. For use in damp locations between -4°F
(-20°C) and 104°F (40°C). Optional High Ambient (HA) ranging to 122°F(50°C) available on certain lumen
packages (See ambient temperature chart for additional information).
DesignLights Consortium® (DLC) Premium qualified product and DLC qualified product. Not all versions
of this product may be DLC Premium qualified or DLC qualified. Please check the DLC Qualified Products
List at www.designlights.org/QPL to confirm which versions are qualified.
BUY AMERICAN — Product with the BAA option is assembled in the USA and meets the
Buy America(n) government procurement requirements under FAR, DFARS and DOT.
Please refer to www.acuitybrands.com/buy-american for additional information.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/support/warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
LED Linear
CLX
24", 36", 48" and 96" Lengths
Catalog
Number
Notes
Type
INDUSTRIAL CLX
Flat Diffuse Lens
Round Diffuse Lens
Wide Diffuse Lens
Stock configurations are offered for shorter lead times:
Stock Part Number UPC
DLC QPL
Product ID
DLC
Premium
CLX L48 3000LM SEF FDL MVOLT GZ10 40K 80CRI WH 00191723525816 PJANKZR4 Yes
CLX L48 3000LM SEF FDL MVOLT GZ10 50K 80CRI WH 00191723525885 PKW32VKL Yes
CLX L48 5000LM SEF FDL MVOLT GZ10 40K 80CRI WH 00191723525939 P77I8Z20 Yes
CLX L48 5000LM SEF FDL MVOLT GZ10 50K 80CRI WH 00191723525908 P8A42C1H Yes
CLX L96 6000LM SEF FDL MVOLT GZ10 40K 80CRI WH 00191723525861 PPFTGRBV Yes
CLX L96 6000LM SEF FDL MVOLT GZ10 50K 80CRI WH 00191723525915 PW6250TE Yes
CLX L96 10000LM SEF FDL MVOLT GZ10 40K 80CRI WH 00191723525922 PYKOC7EW Yes
CLX L96 10000LM SEF FDL MVOLT GZ10 50K 80CRI WH 00191723525830 PKYPL35K Yes
CLX L48 3000LM SEF RDL MVOLT GZ10 40K 80CRI WH 00191723525960 PJANKZR4 Yes
CLX L48 3000LM SEF RDL MVOLT GZ10 50K 80CRI WH 00191723525892 PKW32VKL Yes
CLX L48 5000LM SEF RDL MVOLT GZ10 40K 80CRI WH 00191723525854 P77I8Z20 Yes
CLX L48 5000LM SEF RDL MVOLT GZ10 50K 80CRI WH 00191723525946 P8A42C1H Yes
CLX L96 6000LM SEF RDL MVOLT GZ10 40K 80CRI WH 00191723525878 PPFTGRBV Yes
CLX L96 6000LM SEF RDL MVOLT GZ10 50K 80CRI WH 00191723525823 PD0SSIAD Yes
CLX L96 10000LM SEF RDL MVOLT GZ10 40K 80CRI WH 00191723525953 PYKOC7EW Yes
CLX L96 10000LM SEF RDL MVOLT GZ10 50K 80CRI WH 00191723525847 PKYPL35K Yes
Capable Luminaire
This item is an A+ capable luminaire, which has been designed and tested to provide
consistent color appearance and out-of-the-box control compatibility with simple
commissioning.
All configurations of this luminaire meet the Acuity Brands’ specification for
chromatic consistency
This luminaire is part of an A+ Certified solution for nLight® or XPoint™ Wireless
control networks marked by a shaded background*
To learn more about A+, visit www.acuitybrands.com/aplus.
*See ordering tree for details
TM
Buy American

Summary of content (14 pages)