Installation Guide

Page 5 of 14
U351 Rev. J 03/10/2020
LED IMPORTANT SAFETY INSTRUCTIONS
ZAC/HC36 V-HANGER ACCESSORY THCLX HANGER CLXANGBKT
SECTION B: HANDLING PRECAUTIONS
When handling the fixture during unpacking and installation take precautions of the plastic Lens and plastic end caps. Dropping the
fixture or excess force on the end caps or lens can cause damage.
Section C: PRE-INSTALLATION FOR ALL MOUNTING
1. Ensure power is OFF.
2. Inspect the mounting location for damage before installing new CLX Luminaire. Ensure mounting structure is properly
sized to support the fixture.
3. Remove luminaire from packing and inspect for any damages. If the fixture is damaged do not use; call your local
representative for assistance.
4. WARNING! Removing the lens and opening the fixture during installation exposes the LED’s and puts them at risk for
damage. Damage to the LEDs caused during installation will not be covered under the warranty.
ACYRLIC LENS
PLASTIC HOUSING END CAPS
PLASTIC LENS CAPS
SHEET METAL HOUSING
Test switch located on
the side of the fixture
Sensor option location
*Sensor option adds 2”
to overall fixture length