Installation Guide

Page 13 of 14
U351 Rev. J 03/10/2020
LED IMPORTANT SAFETY INSTRUCTIONS
Wireguard (WGCLX)/Louver (SBL)
1) Install accessory brackets to the top of the fixture with two screws provided.
2) Install Louver or Wireguard to Accessory bracket using four screws provided.
Angle Bracket (CLXANGBKT)
1) Attach fixture to angle mounting bracket using screws provided
2) Attach Angle brackets to ceiling (hardware not provided)
3) Choose desired angle (0, 15, 30, or 45 degrees) and fix mounting bracket into angle position using two screws provided
Warranty terms are located at the link below:
http://www.acuitybrands.com/resources/terms-and-conditions
CLXANGBKT
Screws provided