FAQ Sheet

How many fixtures can I row mount using the PLR option?
The number of fixtures in a row should be determined by the
installing electrition and based on the circuit they are being
wired to. The PLR will not reduce that number.
How do you specify PLR for end of row?
You cannot specify which fixtures will be end of row. For your
end of row fixtures, you will leave one endcap on the fixture.
How does PLR interact with sensors?
The PLR wiring will connect control wires through fixtures using
the PLR plugs.
Is Haleon sensor available on CLX?
Haleon is not available on CLX LED today. We are working to
implement shortly. For fixture-level control, we recommend
nLight
®
, nLight
®
Air, or XPoint
™
Wireless.
If I order a customer color, do I need to specify the sensor
to be the same color?
No. If you order an integrated sensor, the sensor housing and
endcaps will match the fixture.
What lumen packages/lens options are capable of IPS
using VLC?
Only the wide lens is capable of IPS using VLC. 2’ and 3’
fixtures are not capable of having IPS via VLC.
Is CLX LED capable of Beaconing/Positioning using BLE?
No. You can order Atrius
™
enabled which comes with VLC
and BLE.
Is CLX capable of dimming via BLE?
Yes, Atrius will be able to dim the fixtures over BLE. nLight
®
Air
can also control fixtures via BLE.
What lumen packages are available with nTune?
nTune is available on 750 LPF, 1000 LPF, and 1250 LPF levels.
What is the CCT range of Tunable White?
There are two ranges available. One runs from 3000k to 5000k.
The other ranges from 2700k to 6500k.
What controls options are available on CLX LED?
nLight
®
, nLight
®
Air, or XPoint
™
Wireless.
Is DALI/DMX available on CLX LED?
No. This is not a standard option but could be achieved
through the RFD process.
Can I still get 50°C rating with an integrated sensor?
See Temperature chart on next page.
CLX LED Strip Light
Frequently Asked Questions
Industrial