Cut Sheet

Catalog Number
Notes
Type
Fluorescent
General-Purpose Strip
C
2', 3', 4', 6' or 8' length
1 or 2 lamps
FEATURES & SPECIFICATIONS
INTENDED USE
Ideal where high brightness and good illumination levels are required such
as retail, light industrial and warehouses.
ATTRIBUTES
Fixture can be assembled with snap together components and requires no
tools. Available in one lamp or two lamp configuration.
CONSTRUCTION
Heavy-duty channel, die-formed from code-gauge steel.
Sturdy channel cover secured by captive quarter-turn latch for easy
access to wireway.
Combination endplate/channel connector furnished with each fixture.
FINISH
Five-stage iron phosphate pretreatment ensures superior paint adhesion
and rust resistance. Painted parts finished with high-gloss, baked white
enamel.
ELECTRICAL SYSTEM
Thermally protected, resetting, Class P, UL Listed and CSA Certified ballast is
standard. Sound rating depends on lamp/ballast combination.
AWM, TFN, THHN wire throughout, rated for required temperatures.
INSTALLATION
For unit or row installations, surface or suspended mounting.
LISTING
UL listed to US and Canadian safety standards. Optional: Mexico NOM.
WARRANTY
Guaranteed for one year against mechanical defects in manufacture.
Specifications subject to change without notice.
Specifications
Length: 24" (610)
36" (914)
48" (1219)
72" (1829)
96" (2438)
Width: 4-3/8" (111)
Fixture Depth: 2-1/16" (52)
All dimensions are inches (millimeters).
L
W
D
Series
C General-
purpose strip
For tandem double-
length unit, add prefix
T. Example: TC
Number of
lamps
1
2
Not included.
Voltage
MVOLT
1,2
120
277
347
Others available.
NOTES:
1 MVOLT standard for 120-277V applications, 50-60 mhz operation.
Some options require voltage specified.
2 T8 lamps only.
3 Slimline lamps only.
4 Not available in 347V.
5 Not available in slimline.
6 Specify voltage.
7 Order two for 8' fixtures.
Lamp type
T8
17 17W T8 (24")
25 25W T8 (36")
32 32W T8 (48")
96T8 59W T8 slimline (96")
T12 Slimline
36 30W slimline (36")
48 38W slimline (48")
72 55W slimline (72")
96 75W slimline (96")
Accessories
Order as separate catalog numbers.
SQ_ Swivel-stem hanger (specify length in 2" increments).
1B Ceiling spacer (adjusts from 1-1/2" to 2-1/2" from ceiling).
CONLGC 12" screw-on channel connector.
WGCUN Wireguard, 4' white.
5
HC36 Chain hangers (1 pair, 36" long).
HRC Hooker
®
T-bar hanger (flush to ceiling).
HRC1 Hooker
®
T-bar hanger (1-1/2" from ceiling).
WGCSMR Wireguard, 4' white for symmetric reflector.
5
WGCASR Wireguard, 4' white for asymmetric reflector.
5
CSMR 48 Symmetric reflector, 4' white, 7" aperture.
5
CASR 48 Asymmetric reflector, 4' white, 5-3/4" wide.
5
Options
GEB Electronic ballasts, <20% THD
3
GEB10IS Electronic ballasts, <10% THD instant start
1,2
GEB10RS T8 electronic ballast, < 10% THD, rapid start
BILP High-efficiency ballast, .78bf (low), instant start
BINP T8 high-performance ballast, .88 bf (normal),
instant start
BIHP T8 high-performance ballast, 1.20 bf (high), instant
start
4
1/4 One four-lamp ballast
5
EL Emergency battery pack (nominal 300 lumens)
GLR Internal fast-blow fuse (add X for external)
6
GMF Internal slow-blow fuse (add X for external)
6
PLR_ Plug-in wiring; specify 1, 2 or 3 branch circuits and
hot wires (A = Black, B = Red, C = Blue, AB or AC)
TILW Tandem in-line wiring
CW Cold-weather ballast; 0°F starting temp
CSA CSA Certified (only required for 347V)
NOM NOM Certified
Sheet #: C STRP-100
C
For shortest lead times, configure product using standard options (shown in bold).
Example: C 2 32 MVOLT GEB10IS
ORDERING INFORMATION