Specification Sheet

BLC Center Basket Troffer
Accessories: Order as separate catalog number.
DGA24 Drywall grid adapter for 2x4 recessed fixture
DGA22 Drywall grid adapter for 2x2 recessed fixture
2X2SMKSHP PAF 2X2 Surface Mount Troffer Kit Post Paint
2X4SMKSHP PAF 2X4 Surface Mount Troffer Kit Post Paint
PS1050 LED emergency battery pack, 10W 50VDC (Non-compliant with CA T20)
PS1055LCP LED emergency battery pack, 10W Constant Power, Self-Diagnostic, Certified in CA Title 20 MAEDBS
ELA PSRME IC Remote enclosure for battery for insulated ceiling
RK1BDP J40 Disconnect Plug (BDP) Package of 40
RK1BDP J10 Disconnect Plug (BDP) Package of 10
BLC
COMMERCIAL INDOOR: One Lithonia Way Conyers, GA 30012 Phone: [phone]-SERV (7378) www.lithonia.com © 2018-2021 Acuity Brands Lighting, Inc. All rights reserved. Rev. 04/13/21
*DGA accessory available to provide ceiling trim flange and fixture support for plaster
or plasterboard ceiling. Recommended rough-in dimensions for DGA24 installation is
24-3/4" x 48-3/4" (Tolerance is +1/8", -0"). Recommended rough-in dimensions for
DGA22 installation is 24-3/4" x 24-3/4" (Tolerance is +1/8",-0").
MOUNTING DATA
Ceiling Type Appropriate Trim Type
Exposed grid tee (1" and 9/16") G
Concealed grid tee G
Plaster or plasterboard G*
9/16 Screw Slot
15/16
Non-Configurable BLC
Replacement Parts
*2610C8 BLC 2X2 ADSM LENS KIT 2' Replacement Curved Smooth Lens *26282Y BLC 2X2 SDSM LENS KIT 2' Replacement Square Smooth Lens
*27328C BLC 2X2 ADSMT LENS KIT 2' Replacement Curved Smooth Lens with Trim Ring *27328J BLC 2X2 SDSMT LENS KIT 2' Replacement Square Smooth Lens with Trim Ring
*2610CG BLC 2X4 ADSM LENS KIT 4' Replacement Curved Smooth Lens *26282X BLC 2X4 SDSM LENS KIT 4' Replacement Square Smooth Lens
*27328P BLC 2X4 ADSMT LENS KIT 4' Replacement Curved Smooth Lens with Trim Ring *27328T BLC 2X4 SDSMT LENS KIT 4' Replacement Square Smooth Lens with Trim Ring
Stock/MTO Catalog Discription UPC Lumens Wattage LPW Color Temperature Diffuser Type Voltage Pallet Quantity
Stock BLC 2X2 3300LM 35K ADSM 193048323177 3329 30W 110.9 3500K Curved Smooth 120-277 56
BLC 2X2 3300LM 40K ADSM 193048323269 3382 30W 112.7 4000K Curved Smooth 120-277 56
BLC 2X2 4000LM 35K ADSM 193048323399 4063 36W 112.8 3500K Curved Smooth 120-277 56
BLC 2X2 4000LM 40K ADSM 193048323382 4128 36W 114.6 4000K Curved Smooth 120-277 56
BLC 2X4 4000LM 35K 191848536575 4034 32W 126.0 3500K Square Smooth 120-277 28
BLC 2X4 4000LM 35K ADSM 193048323443 4034 32W 126.0 3500K Curved Smooth 120-277 28
BLC 2X4 4000LM 40K 191848536629 4098 32W 128.0 4000K Square Smooth 120-277 28
BLC 2X4 4000LM 40K ADSM 193048323511 4098 32W 128.0 4000K Curved Smooth 120-277 28
BLC 2X4 5000LM 35K 191848536636 4920 43W 114.4 3500K Square Smooth 120-277 28
BLC 2X4 5000LM 35K ADSM 193048323535 4920 43W 114.4 3500K Curved Smooth 120-277 28
BLC 2X4 5000LM 40K 191848536599 4999 43W 116.2 4000K Square Smooth 120-277 28
BLC 2X4 5000LM 40K ADSM 193048323528 4999 43W 116.2 4000K Curved Smooth 120-277 28
MTO BLC 2X2 3300LM 35K 191848536469 3329 30W 110.9 3500K Square Smooth 120-277 56
BLC 2X2 3300LM 40K 191848536506 3382 30W 112.7 4000K Square Smooth 120-277 56
BLC 2X2 4000LM 35K 191848536544 4063 36W 112.8 3500K Square Smooth 120-277 56
BLC 2X2 4000LM 40K 191848536551 4128 36W 114.6 4000K Square Smooth 120-277 56
‡ Option Value Ordering Restrictions
Option Value Restriction
347 Not available with EL14L option.
Controls Must specify diffuser with trim rings.
EL14L, E10WLCP When using pre-wire option, use PWS1846 or PWS1846 PWSLV
Lumens Approximate lumen output.
JOT Wireless
Sensor Switch JOT Enabled Wireless Solution
1. Power: Install JOT enabled fixtures and controls as instructed.
2. Pair: Insert the provisioning tool into the pinhole on the wall switch; press and hold any button for 6 seconds.
3. Play: Once pairing, each fixture will individually dim down to 10% brightness. All products will be fully functional.
BLC Series
Sensor Switch
WSXA JOT
Designed with contractors in mind, the Sensor Switch JOT enabled wireless solution offers a straightforward
approach to the installation and pairing of lighting fixtures and controls. Absolutely no 0-10V control wires and no
mobile apps are needed with JOT enabled products, allowing for lightning speed installation right out of the box.
BLC Series
with integrated
JOT OCC
Sensors
Sensor Switch
SPODMRA JOT