Specification Sheet

One Lithonia Way, Conyers, GA 30012 | 770-922-9000 | www.lithonia.com

CONTRACTOR SELECT BARNGUARD SERIES LED

INTENDED USE:

The energy savings, long life and easy-to-install design of the BGR LED make it the smart

choice for street and alleyway lighting, farms, and building-or-postmounted doorway,

pathway and yard illumination for any commercial or residential facility. Use the BGR P1 for

best energy savings and the BGR P2 for maximum illumination. MVOLT (120V-277V) input

for both residential and commercial applications. Rated for operation up to 40°C (104°F)

ambient temperature.

CONSTRUCTION:

Die-cast aluminum housing with an impact-resistant, polycarbonate lens. The luminaire is

sealed against moisture and environmental contaminants.

OPTICS:

Removable lower diffuser provides some up-light for a traditional appearance and reduces

discomfort glare. DesignLights Consortium® (DLC) qualied with or without diffuser. 80 min.

CRI for BGR LED P1 and 70 min. CRI for BGR LED P2.

ELECTRICAL:

Energy-efcient LEDs are mounted on the integral aluminum heat sink to maximize heat

dissipation and promote long LED life (L70/100,000 hours at 25°C). 6kV surge protection.

Twist-lock, replaceable, MVOLT (120V-277V) photocell is standard equipment.

INSTALLATION:

Mounts directly to wooden posts or poles using (3) 2” lag bolts (included) or can be used

with an existing 1-5/8” mounting arm. Can also be installed using the Lithonia Lighting OMA

mounting arm (sold separately).

LISTINGS:

UL Listed to U.S. and Canadian safety standards for wet locations.

DesignLights Consortium® (DLC) qualied product. Please check the DLC Qualied Products

List at www.designlights.org/QPL to conrm.

WARRANTY:

5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specications subject to change without notice.

Specifications Dimensions

All dimensions are inches (centimeters) unless otherwise indicated.

TDD2:

Width: 9-1/2" (24.0 cm)

Height: 9-1/8" (23.0 cm)

Depth: 11-3/8" (29.0 cm)

Weight: 4.8 lbs. (2.17 kg)

BACKPLATE:

Width: 2-3/4" (7 cm)

Height: 2-1/4" (5.6 cm)

Opening: 1-3/4" (4.5 cm)