Specification

One Lithonia Way, Conyers, GA 30012 | 770-922-9000 | www.lithonia.com
© 2020-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 08/16/22 Page 2 of 2
CONTRACTOR SELECT BARNGUARD SERIES LED
INTENDED USE:
The energy savings, long life and easy-to-install design of the BGR LED make it the smart
choice for street and alleyway lighting, farms, and building-or-postmounted doorway,
pathway and yard illumination for any commercial or residential facility.
CONSTRUCTION:
Die-cast aluminum housing with an impact-resistant, polycarbonate lens. The luminaire is
sealed against moisture and environmental contaminants.
OPTICS:
Removable lower diffuser provides some up-light for a traditional appearance and reduces
discomfort glare. 80CRI min.
ELECTRICAL:
Energy-efcient LEDs are mounted on the integral aluminum heat sink to maximize heat
dissipation and promote long LED life. 6kV surge protection. Replaceable twist-lock photocell
is standard equipment. Adjustable lumen output is achieved with 0-10V continuous dimming
capable drivers, ensuring system power factor>90% and THD <20%.
INSTALLATION:
Mounts directly to wooden posts or poles using (3) 2" lag bolts (included) or can be used
with an existing 1-5/8" mounting arm. Can also be installed using the Lithonia Lighting OMA
mounting arm (sold separately).
LISTINGS:
UL Listed to U.S. and Canadian safety standards for wet locations.
DesignLights Consortium® (DLC) qualied product. Please check the DLC Qualied Products
List at www.designlights.org/QPL to conrm.
WARRANTY:
5-year limited warranty. This is the only warranty provided and no other statements in this
specication sheet create any warranty of any kind. All other express and implied warranties
are disclaimed. Complete warranty terms located at: www.acuitybrands.com/support/
warranty/terms-and-conditions
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
Specifications Dimensions
All dimensions are inches (centimeters) unless otherwise indicated.
Width: 9.45" (24.0 cm)
Height: 9.13" (23.0 cm)
Depth: 11.42" (29.0 cm)
Weight: 4.8 lbs. (2.17 kg)
H
W
D
W
H
O
BACKPLATE:
Width: 2-3/4" (7 cm)
Height: 2-1/4" (5.6 cm)
Opening: 1-3/4" (4.5 cm)
Electrical Characteristics
Electrical Load
Current (A)
Series
Delivered
Lumens
Input
Power
120V 208V 240V 277V
BGR
6,000L 42 0.35 0.2 0.18 0.15
10,000L 71.8
0.6 0.35 0.3 0.26