Technical Specifications
All dimensions are inches (centimeters) unless otherwise specified.
FEATURES & SPECIFICATIONS
INTENDED USE
For use with housings L7X, L7XR, LC6, L7XF and L7XFR.
CONSTRUCTION
Aluminum one piece reflector.
Polyester powder coat paint.
All anodized finishes have white integral flange ring as standard.
INSTALLATION
Socket to trim interface.
Trim retention is achieved by utilizing two side-mounted torsion springs on the trim
and two receiving brackets in the can, ensuring a consistently tight fit with the ceiling.
LISTINGS
U.L. Listed to U.S. and Canadian safety standards.
Damp location listed.
NOTE: Specifications subject to change without notice.
Specifications
Height: 6-1/8 (15.6)
Lamp opening: 5-7/8 (14.9)
Diameter: 7-5/8 (19.4)
6" Full Reflector Trim
7O2
OPEN
Narrow Flange
5-7/8" (14.9)
7-5/8" (19.4)
Downlighting and Track Sheet #: 7O2-TOR
For shortest lead times, configure product using standard options (shown in bold).
Example: 7O2 TOR
ORDERING INFORMATION
Series
7O2
7O2
Finish
(blank) White
MW Matte whte
Housing Compatibility
Housing and trim ordered separately.
Application Source Maximum Housing
wattage
IC Incandescent 75 PAR30 L7X, L7XR, LC6
65 BR30 L7X, L7XR, LC6
Fluorescent 13DTT L7XF, L7XFR
26TRT L7XF, L7XFR
Catalog Number
Notes Type
Mounting method
TOR Torsion springs
TOR