Technical Specifications

FEATURES & SPECIFICATIONS
INTENDED USE
For use with housings L7X, L7XR, LC6, LCP, L7XP, L7XPR, L7XF and L7XFR.
CONSTRUCTION
Aluminum white sphere.
Polyester powder coat paint.
25 degree vertical tilt standard.
Antique bronze, oil-rubbed bronze, brushed nickel and white finishes are one piece
aluminum reflector with integral flange.
INSTALLATION
Socket-to-trim interface.
Trim retention is achieved by utilizing two side-mounted torsion springs on the
trim and two receiving brackets in the can, ensuring a consistently tight fit with
the ceiling.
LISTINGS
U.L. Listed to U.S. and Canadian safety standards.
Damp location listed.
WARRANTY
1-year limited warranty. Complete warranty terms located at
http://www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
NOTE: Specifications subject to change without notice.
Specifications
Height: 4 (10.2)
Lamp opening: 4-7/8 (12.4)
Diameter: 7-5/8 (19.4)
6" Full Reflector Trim
7E1
STANDARD EYEBALL
Wide Flange
Downlighting and Track Sheet #: 7E1-TOR
Series
7E1
7E1
Finish
(blank) White eyeball
MW Matte white
BN Brushed nickel
ORB Oil-rubbed bronze
BZA Antique bronze
7-5/8" (19.4)
4-7/8" (12.4)
All dimensions are inches (centimeters) unless otherwise specified.
Housing Compatibility
Housing and trim ordered separately.
Maximum
Application Source wattage Housing
IC Incandescent 75 PAR30 L7X, L7XR, LC6, LCP, L7XP, L7XF
65 BR30 L7X, L7XR, LC6, LCP, L7XP, L7XF
Fluorescent 18 TRT L7XF, L7XFR
All configurations of this product are considered "standard" and have short lead times.
Example: 7E1 TOR
ORDERING INFORMATION
Catalog Number
Notes Type
Mounting method
TOR Torsion springs
TOR