Technical Specifications

Catalog Number
Notes Type
All dimensions are inches (centimeters).
FEATURES & SPECIFICATIONS
INTENDED USE
For use with housings LC6, LI6, L7X, L7XR, LI6F, L7XF, L7XFR and frame-ins LP6
and LP6F.
CONSTRUCTION
Aluminum white reflector.
Polyester powder coat paint.
Drop opal, flat white or fresnel glass lens.
White integral flange as standard.
INSTALLATION
Socket to trim interface.
Rough-ins with clips retain trims.
Retaining clips riveted to top of reflector to hold trim inside housing.
LISTING
U.L. Listed to U.S. and Canadian safety standards.
Wet location listed.
Specifications
Height: 7-3/8 (18.7)
Lamp opening: 6 (15.3)
Diameter: 7-5/8 (19.4)
Trim height when used with Non-IC
incandescent rough-ins.
6" Full Reflector Trim
6L3/4
GLASS LENS
Wet Location
Narrow Flange
Housing Compatibility
Housing and trim ordered separately.
Application Source Maximum wattage Housing
IC Incandescent 60 A19 LI6
Fluorescent 13 DTT L7XF, L7XFR
26TRT LI6F, L7XF, L7XFR
6LD3 or 6LDB3 only 32 TRT LI6F
Non-IC Incandescent 100 A19 LP6
75 A19 LC6, L7X, L7XR
Fluorescent
6LD3 or 6LDB3 only 18 DTT L7XF, L7XFR
18 TRT L7XF, L7XFR, LP6F
26TRT LP6F, L7XF, L7XFR
Series
6LD3 White splay, drop opal lens
6LDB3 Black baffle splay, drop prismatic lens
6LF3 White splay, flat white lens
6LFB3 Black baffle splay, flat white lens
6L4 White splay, fresnel lens
6LB4 Black baffle splay, fresnel lens
6" (15.3)
7-5/8" (19.4)
7-3/8"
(18.7)
RLNS-110
For shortest lead times, configure product using standard options (shown in bold).
Example: 6LD3
ORDERING INFORMATION