Technical Specifications

Direct-Wire LED Recessed Downlight
6JBK RD
IC
Remodel
Specications
Aperture: 4-3/4" (119.7)
Overlap Trim: 7-1/4" (184.6)
Height: 5" (127.9)
Ceiling Opening: 6-1/2" (165)
Min Ceiling Thickness: 1/2" (12.7)
Max Ceiling Thickness: 1-1/2" (38.1)
All dimensions are inches (millimeters).
FEATURES & SPECIFICATIONS
INTENDED USE — The OneUp™ recessed direct-wire LED downlights includes integrated junction box,
trim, pre-installed non-metallic bushings and 3-port push wire quick connectors in one package. The
OneUp is the most economical means to create a well lit environment with exceptional energy eciency
and near zero maintenance.
CONSTRUCTION — Spun steel, round bae trim. Integrated galvanized steel junction box with captive
door for easy access. Suitable for daisy chaining (pulling wires). Available in 3000K color temperature
LEDs.
OPTICS — Round bae recesses optical system into the ceiling to prevent glare and provide a
traditional look. Diused lens provides even light distribution for general illumination, equivalent to
65W incandescent ood lamp. Wide ood beam angle at >90°. CRI >90. Maintains at least 70% light
output for 50,000 hours.
INSTALLATION — Tool-less installation. Secure trim retention with two side-mounted spring clips
for easy installation in plaster, sheet rock, or plywood ceilings. The integrated junction box - with
pre-installed non-metallic bushing - allows non-metallic cable to be fed through without the hassle
of knockouts. The captive junction box door provides easy access to pre-installed 3-port push wire
quick connectors for straight-forward wiring. Rated for Type IC installations. Maximum of 4 No. 12AWG
through branch circuit conductor suitable for 90°C permitted in box. Ground wire provided.
ELECTRICAL SYSTEM — LED module with high-eciency on board driver. Dimming down to 10%. For
compatible dimmers, refer to: Compatible dimmers chart.
Actual wattage may dier by +/-5% when operating at 120V +/-10%.
LISTINGS — ETL certied to US and Canadian safety standards. California T24 compliant. WSEC
ASTEM E283 for Air-Tight rated with gasket or caulking between xture trim and ceiling. ENERGY STAR®
certied. Wet location listed*. Indoor damp location only for items in Brushed Nickel nish.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may dier as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specications subject to change without notice.
DOWNLIGHTING 6JBK RD
Catalog
Number
Notes
Type
Notes
1 Total System Delivered Lumens.
2 Indoor damp location only for
items in Brushed Nickel Finish.
4-3/4”
[119.7]
7-1/4”
[185.0]
5”
[127.9]
Series Shape CCT/Watts/Lumens
1
CRI Finish
6JBK RD Round 27K 2700K/10.9W/820L
30K 3000K/10.9W/850L
40K 4000K/10.9W/870L
50K 5000K/10.9W/880L
90CRI 90 CRI MW Matte White
BN Brush Nickel
2
ORB Oil-Rubbed Bronze
ORDERING INFORMATION
For shortest lead times, congure product using standard options (shown in bold).
Example: 6JBK RD 30K 90CRI MW
IC RATED
AIRTIGHT
Brushed nickel
Oil-rubbed bronze
Accessories: Order as separate catalog number.
OUJBK643 U Universal Construction Pan
Universal Construction Pan