Specification

6iG 6" LED iGimbal Module
6iG LED iGIMBAL
DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: [phone] Fax: [phone] www.lithonia.com © 2015-2016 Acuity Brands Lighting, Inc. All rights reserved. Rev. 03/29/16
ENERGY DATA – 6iG*
Lumens 720 750 770
watts 11.9 12.2 11.6
LPW 61 61 66
CRI 92 92 95
Color Temp 2700 3000 4000
Minimum Starting Temp 0°F (-18°C) 0°F (-18°C) 0°F (-18°C)
EMI/RFI FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B FCC Title 47 CFR, Part 15, Class B
Min. Power Factor 0.90 0.90 0.90
Input current 0.10A 0.10A 0.10A
*Values at non-dimming line voltage.
COMPATIBLE DIMMER SWITCHES
Manufacturer Model/Series Part Numbers Type
Sensor Switch nLight
nSP5 PCD 2W 2-Way 575W Incandescent
nSP5 PCD ELV 120 475W Electronic Low Voltage
Pass & Seymour Harmony HCL453PTCCCV6 3-Way 450W LED and CFL
Leviton Sure Slide™ Decora
6633-P 3-Way 600W Incandescent
6615-P 3-Way 300W Incandescent
Lutron
Skylark SELV-300P 300W Electronic Low Voltage
Nova T NTELV-300P 300W Electronic Low Voltage
DIMMING AND ENERGY DATA
When installing the LED Modules on a run with a dimmer, please use the following rule of thumb when determining the
number of fixtures controlled by a single dimmer:
• Figure that each LED fixture represents a 65 Watt load
• Divide the maximum load of the dimmer by 65 watt fixture load. (round down to the nearest whole number).
Example:
Dimmer max load=600 watts
LED fixture load=65 watts
600 watts/65 watts per fixture=9 fixtures per run