Cut Sheet
FEATURES & SPECIFICATIONS
INTENDED USE
For use with housings LC6, L7X, L7XR.
CONSTRUCTION
Oil-rubbed bronze, brushed nickel and white finishes are one-
piece aluminum open reflector with integral flange.
INSTALLATION
Socket to trim interface.
Trim retention is achieved by utilizing two side-mounted torsion springs on the trim
and two receiving brackets in the can, ensuring a consistently tight fit with the ceiling.
LISTINGS
U.L. Listed to U.S. and Canadian safety standards.
Wet location listed when used with outdoor rated 75W PAR38 or 75W PAR30
short neck lamp.
NOTE: Specifications subject to change without notice.
Specifications
Height: 4-3/4 (12.1)
Lamp opening: 6-1/8 (15.6)
Diameter: 7-5/8 (19.4)
6" Finishing Trim
6H2O
WETLITE
Drop Flange
Housing Compatibility
Housing and trim ordered separately.
Maximum
Application Source wattage Housing
IC Incandescent 75 PAR38* LC6, L7X, L7XR
75 PAR30* (shortneck) LC6, L7X, L7XR
*outdoor rated lamp only
Downlighting and Track
Sheet #: 6H2O-TOR
Lamp included with
trim
(75W PAR30)
6-1/8" (15.6)
7-5/8" (19.4)
Series
6H2O
6H2O
Finish
(blank) White
MW Matte white
ORB Oil-rubbed bronze
BN Brushed nickel
For shortest lead times, configure product using standard options (shown in bold).
Example: 6H20 TOR
ORDERING INFORMATION
Catalog Number
Notes Type
Mounting method
TOR Torsion springs
TOR
All dimensions are inches (centimeters) unless otherwise specified.