Specification Sheet

One Lithonia Way, Conyers, GA 30012 | (800) 705-SERV (7378) | www.acuitybrands.com

CONTRACTOR SELECT 65BE 65SE SWW5

LED RETROFIT DOWNLIGHT TRIM:

Aluminum spun reector with deep regression for reduced glare • Inner reector cone

funnels light through the pressed-in diffused lens • All-in-one design where LED light engine

mounts directly to trim for ease of installation into existing 5" or 6" recessed housings with

medium base sockets • Provided with torsion springs.

LED LIGHT ENGINE:

LEDs are mounted directly to cast aluminum housing providing superior thermal

management to ensure long life • Switchable white LED color temperature technology offers

2700K, 3000K, 3500K, 4000K, 5000K all in one trim • 90 CRI minimum • Accommodates

120 volts AC at 60Hz • Dimmable with most standard incandescent, magnetic low voltage

and electronic low voltage dimmers • For a list of compatible dimmers, see

JUNOESERIES-DIM.

OPTICAL SYSTEM:

Diffused lens at end of mixing chamber to provide even light distribution for general

illumination • 900L is equivalent to 75W BR30 lamp • 1200L is equivalent to 120W lamp.

ELECTRICAL CONNECTIONS:

Trim features quick connect plug installed as standard for installation into LEDT24 housings

with mating connector • Trim ships with a medium base socket adapter whip for installation

into 5" or 6" incandescent housings with medium base sockets.

DESIGNER COLOR FINISH TRIM INSERTS: (sold separately)

Color Finish Trim inserts are accessory rings that attach to the 65BE/65SE module for a

permanent nish. Trim styles include bafe or smooth in the following nishes:

• Black

• Brush Nickel

• Oil-Rubbed Bronze

LIFE:

Rated for 50,000 hours at 70% lumen maintenance.

LABELS:

CSA certied to US and Canadian safety standards • ENERGY STAR® certied product

• Suitable for wet location • Air-Loc certied in accordance with ASTM E283-2004 • NOM

Certied • Can be used to comply with California Title 24 Part 6 High Efcacy LED light Source

Requirements • T20 Certied.

TESTING:

All reports are based on published industry procedures; eld performance may differ from

laboratory performance.

WARRANTY:

5-year limited warranty. Complete warranty terms located at:

www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specications subject to change without notice.

Speciﬁcations Dimensions

3-2/3"

4-1/8"

7-5/8"