Technical Specifications

Catalog Number
Notes Type
FEATURES & SPECIFICATIONS
INTENDED USE
For use with housings L5 and L5R.
CONSTRUCTION
Aluminum one-piece refl ector.
Polyester powder-coat paint.
All anodized fi nishes have white integral fl ange ring as standard.
INSTALLATION
Socket to trim interface.
Trim retention is achieved by utilizing two side-mounted torsion springs on the
trim and two receiving brackets in the can, ensuring a consistently tight fi t with
the ceiling.
LISTINGS
UL Listed to U.S. and Canadian safety standards.
Damp location listed.
WARRANTY
One-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx.
Note: Specifi cations subject to change without notice.
Specifi cations
Height: 5-3/4 (14.6)
Lamp opening: 5-1/8 (13)
Diameter: 6-3/8 (16.2)
5" Finishing Trim
5O2
OPEN DEEP
Narrow Flange
5O2
Series
5O2
Finish
1
(blank) White
MW Matte white
BN Brushed nickel
BZA Antique bronze
ORB Oil-rubbed
bronze
Downlighting and Track
Sheet #: 5O2-TOR
Mounting method
TOR Torsion springs
Housing Compatibility
Housing and trim ordered separately.
Application Source Maximum wattage Housing
IC Incandescent 65 BR30 L5, L5R
50 R20 L5, L5R
75 PAR30 (short neck) L5, L5R
NOTES:
1 For anodized fi nishes, see 5O2 spec sheet.
Lead times will vary depending on options selected. Consult with your sales representative.
Example: 5O2 TOR
ORDERING INFORMATION
TOR
All dimensions are inches (centimeters) unless otherwise specifi ed.
5-1/8
(13)
6-3/8
(16.2)
5-3/4
(14.6)