Specification

5iG
IC/Non-IC
Retrofit iGimbal
Specifications
Aperture: 3-1/2 (8.9)
Ceiling opening: as rough-in
Height: 5-1/16 (12.8)
Overlap trim: 6-5/16 (16.0)
All dimensions are inches (centimeters) unless otherwise indicated.
FEATURES & SPECIFICATIONS
INTENDED USE —The adjustable LED iGimbal downlighting module is 80% more efficient than incan-
descent luminaries, performing for 35,000 hours or more with exceptional energy efficiency and near zero
maintenance. The LED iGimbal is intended for sloped ceiling applications, grazing textured surfaces, wall
washing, and highlighting artwork or other architectural features. Retrofits into most existing recessed
downlighting installations or new construction and remodel applications.
CONSTRUCTION — Spun steel gimbal reflectors with 360° of rotation and at least 50° of adjustable
tilt in both directions. Driver affixed to a static yoke to allow maximization of LED light engine rotation
and pivot movements.
OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illu-
mination, equivalent to 65W incandescent flood lamp. Wide flood beam angle at >90°. Utilizes 2700K,
3000K and 4000K color temperature LEDs. CRI – 90+. The LED module maintains at least 70% light
output for 35,000 hours.
ELECTRICAL — Primary power disconnect provided for simple connection to a dedicated LED connector
in the housing. Dimming down to 15%.
INSTALLATION — Suitable for installation in standard height rough-in sections. E26 socket adapter
and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for
Title 24 compliance. Trim retention is achieved by utilizing two side-mounted torsion springs to ensure a
consistently tight fit with the ceiling and easy installation.
LISTINGS — ETL certified to US and Canadian safety standards. FCC Certified. ENERGY STAR® certified;
California T24 compliant. Damp location listed.
WARRANTY — 5-year limited warranty. Complete warranty terms located at
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
Notes
1 Minimum 90-day lead time for non-standard color finishes; minimum
50-piece order quantity.
2 Total system delivered lumens.
3 90 day lead time for 4000k color temperature. Minimum 50 piece order qty.
4 Must be ordered on a separate line.
DOWNLIGHTING 5iGLED iGIMBAL
D
I
M
M
A
B
L
E
5iG LED
Series/Finish Lamp CCT/CRI/W/Lumens
2
Voltage Options
5iG 5" iGimbal
module
MW Matte white
MB Matte black
BN Brush nickel
ORB Oil-rubbed
bronze
1
LED 27K 90CRI 2700K/92CRI/11.9W/720L
30K 90CRI 3000K/90CRI/12.2W/750L
40K 90CRI 4000K/95CRI/11.9W/770L
3
(blank) 120V L5LED T24 IC rated, new construction rough-in
LED base
L5RLED T24 IC rated, remodel rough-in LED base
L5 IC rated, new construction rough-in
4
L5R IC rated, remodel rough-in
4
ORDERING INFORMATION
For shortest lead times, configure product using standard options (shown in bold).
Example: 5iGMW LED 27K 90CRI L5LED T24
Catalog
Number
Notes
Type
Accessories: Order as separate catalog number.
TSA5 Makes non-bracket housings compatible with LED module
50°
360°
3-1/2 (8.9)
3-13/16 (9.7)
6-5/16 (16.0)
5-1/16 (12.8)
Splice Kit
(included)
E26 adaptor
(included)