Technical Specifications

FEATURES & SPECIFICATIONS
INTENDED USE
For use with housings L5 and L5R.
CONSTRUCTION
Durable powder-coated steel finishing trim.
Directional accent lighting gimbal ring.
35° vertical tilt standard.
180° horizontal rotation.
INSTALLATION
Socket to trim interface.
Trim retention is achieved by utilizing two side-mounted torsion springs on the trim
and two receiving brackets in the can, ensure a consistently tight fit with the ceiling.
LISTINGS
U.L. Listed to U.S. and Canadian safety standards.
Damp location listed.
NOTE: Specifications subject to change without notice.
Specifications
Height: 7/8 (2.2)
Lamp opening: 3/8 (9.6)
Diameter: 6-3/8 (16.2)
5" Finishing Trim
5G1
GIMBAL
Narrow Flange
Housing Compatibility
Housing and trim ordered separately.
Application Source Maximum wattage Housing
IC Incandescent 75 PAR30
(short or long neck) L5, L5R
Downlighting and Track
Sheet#: 5G1-TOR
7/8
(2.1)
3-5/16
(8.4)
6-5/16
(16.0)
All dimensions are inches (centimeters) unless otherwise specified.
For shortest lead times, configure product using standard options (shown in bold).
Example: 5G1 TOR
ORDERING INFORMATION
Series
5G1
5G1
Finish
(blank) White
MW Matte
white
Catalog Number
Notes Type
Mounting method
TOR Torsion springs
TOR

Summary of content (2 pages)