Installation Guide

Lithonia Downlighting Part No. RD303378 Rev. A

800-315-4935 / www.lithonia.com Page 5 of 15

INSTALLATION INSTRUCTIONS

3” – 3iG iGimbal LED Modules, 4” – 4iG iGimbal LED Modules,

5” – 5iG iGimbal LED Modules, 6” – 6iG iGimbal LED Modules

2. Reinsert the TSA5 or TSA6 into the can with the hooks facing upward. Line up the slots with the holes and align the

bottom of the TSA5 or TSA6 flush with the can.

3. Drive the (3) screws through the TSA5 or TSA6 bracket-slots and into the can to secure into position.

4. Refer back to the “INSTALLATION – 5” and 6” LED MODULE” section for further instruction.

RECOMMENDED DIMMING SWITCHES

The Lithonia LED Modules are compatible with standard incandescent (Triac), electronic low voltage (ELV), and magnetic

low voltage (MLV) dimmers. A list of recommended dimmers, to help with your installation, can be found on

www.lithonia.com by searching for 3iG, 4iG, 5iG, 6iG. Exclusion from the list does not mean a dimmer will not work in

conjunction with our LED modules, just that it has not been tested by Lithonia Lighting. It is also recommended that you

contact your specific dimmer manufacturer for any details or concerns since each dimmer and application is unique.

RECESSED CAN COMPATIBILITY

Lithonia's 3” LED iGimbal modules were tested to fit in a minimum enclosure of 3.0” diameter by 5.45” height, while having

a maximum diameter (for flange coverage) of 4.10”.

Lithonia's 4" LED iGimbal modules were tested to fit in a minimum enclosure of 4” diameter by 5.9” height, while having a

maximum diameter (for flange coverage) of 5.15”.

Lithonia's 5" LED iGimbal modules were tested to fit in a minimum enclosure of 5” diameter by 5.9” height, with a

maximum flange diameter of 6.35”.

Lithonia's 6" LED modules were tested to fit in a minimum enclosure of 6” diameter by 7.5” height, with a maximum flange

diameter of 7.25”.

This was selected to provide fitment into most industry housings available. For our complete (but not exhaustive)

competitive housing compatibility list, please go to www.lithonialighting.com and search for 3iG, 4iG, 5iG and 6iG.

LISTINGS

ETL certified to US and Canadian safety standards; Energy Star qualified; California Title 24 compliant; damp location

listed; LED Dimmable; IC/Non-IC.

WARRANTY

Lithonia Lighting warrants LED products sold hereunder to be free from defect in manufacturing, under normal and proper

storage, installation, and use, for a period of five (5) years from the date of shipment. Our guarantee liability extends only

to the repair or replacement of the defective part, and no labor charges for correction of the defect by repair or

replacement will be paid by Lithonia Lighting unless prior written authority has been granted by contacting our Post Sale

department at 1-800-315-4935.