Specification Sheet

Direct-Wire LED Recessed Downlight
4JBK ADJ
IC
Remodel
Specifications
Aperture: 2-1/2" (62.0)
Overlap Trim: 4-7/8" (124.0)
Height: 4-5/8" (117.2)
Ceiling Opening: 4-5/8" (117)
Min Ceiling Thickness: 1/2" (12.7)
Max Ceiling Thickness: 1-1/2" (38.1)
All dimensions are inches (millimeters).
FEATURES & SPECIFICATIONS
INTENDED USE — The OneUp™ recessed direct-wire LED downlight includes integrated junction box,
trim, pre-installed non-metallic push-in connectors, and wago connectors in one package. The OneUp is
the most economical means to create a well lit environment with exceptional energy efficiency and near
zero maintenance.
CONSTRUCTION — Spun steel, round baffle trim. Integrated galvanized steel junction box with captive
door for easy access. Suitable for daisy chaining (pulling wires). Available in 3000K color temperature
LEDs.
OPTICS — Round adjustable gimbal w/180 degrees of rotation and 35 degrees of adjustable tilt in both
directions. Diffused lens provides even light distribution for general illumination, equivalent to 65W
incandescent flood lamp. Wide flood beam angle at >90°. CRI >90. Maintains at least 70% light output
for 50,000 hours.
INSTALLATION — Tool-less installation. Secure trim retention with two side-mounted spring clips for
easy installation in plaster, sheet rock, or plywood ceilings. Two non-metallic push-in connectors and
three wago connectors pre-installed. Rated for Type IC installations. Maximum of 4 No. 12AWG through
branch circuit conductor suitable for 90°C permitted in box. Ground wire provided.
ELECTRICAL SYSTEM — LED module with high-efficiency on board driver. Dimming down to 10%. For
compatible dimmers, refer to: Compatible dimmers Chart.
Actual wattage may differ by +/-5% when operating at 120V +/-10%.
LISTINGS — ETL certified to US and Canadian safety standards. Can be used to comply with California
Title 24 Part6 High Efficacy LED Light Source Requirements. WSEC ASTEM E283 for Air-Tight rated with
gasket or caulking between fixture trim and ceiling. ENERGY STAR® certified. Damp location listed.
WARRANTY — 5-year limited warranty. Complete warranty terms located at:
www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx
Note: Actual performance may differ as a result of end-user environment and application.
All values are design or typical values, measured under laboratory conditions at 25 °C.
Specifications subject to change without notice.
DOWNLIGHTING 4JBK ADJ
Catalog
Number
Notes
Type
Notes
1 Total System Delivered Lumens.
4.62 [117.3]
4.88 [124.0]
2.44 [62.0]
Series Shape CCT/Watts/Lumens
1
CRI Finish
4JBK ADJ Round Adjustable 30K 3000K/8.2W/620L 90CRI 90 CRI MW Matte White
BN Brushed Nickel
ORB Oil Rubbed Bronze
ORDERING INFORMATION
For shortest lead times, configure product using standard options (shown in bold).
Example: 4JBK ADJ 30K 90CRI MW
Brushed nickel
Oil-rubbed bronze
IC RATED
AIRTIGHT

Summary of content (2 pages)