Technical Specifications

FEATURES & SPECIFICATIONS
INTENDED USE
For use with housings L3 and L3R.
CONSTRUCTION
All finishes have white integral flange.
INSTALLATION
Socket to trim interface.
Retaining clips pull and snap onto top of reflector to hold trim inside housing.
LISTINGS
U.L. Listed to U.S. and Canadian safety standards.
Damp location listed.
Pull on clip Patent # (U.S.) 5707143, (Canada) 2193902.
NOTE: Specifications subject to change without notice.
Specifications
Height: 4-3/4 (12.1)
Lamp opening: 3-1/2 (8.9)
Diameter: 4-7/8 (12.4)
3" Finishing Trim
3O1
OPEN SHALLOW
Narrow Flange
Housing Compatibility
Housing and trim ordered separately.
Maximum
Application Source wattage Housing
IC Incandescent 35 PAR20 L3, L3R
30 R20 L3, L3R
Non-IC Incandescent 50 PAR20 L3, L3R
Downlighting and Track
Sheet #: 301 ROPN-250
Series
3O1
3O1
Finish
(blank) White
MW Matte white
BN Brushed nickel
BZA Antique bronze
ORB Oil-rubbed bronze
Anodized finish
A Clear diffuse
AZ Clear specular
BLZ Black specular
3-1/2" (8.9)
4-7/8" (12.4)
3-1/2" (8.9)
4-7/8" (12.4)
4-3/4"
(12.1)
NOTES:
1 Available with anodized finishes only.
All dimensions are inches (centimeters) unless otherwise specified.
For shortest lead times, configure product using standard options (shown in bold).
Example: 3O1
ORDERING INFORMATION
Catalog Number
Notes Type