Technical Specifications

FEATURES & SPECIFICATIONS
INTENDED USE
For use with housings L3 and L3R.
CONSTRUCTION
Antique bronze, oil-rubbed bronze, brushed nickel and white finishes are one-piece
aluminum spheres.
25 degree vertical tilt standard.
350 degree horizontal rotation.
Integral flange.
INSTALLATION
Socket to trim interface.
Retaining clips installed at factory to top of reflector to hold trim inside housing.
LISTINGS
U.L. Listed to U.S. and Canadian safety standards.
Damp location listed.
Pull on clip Patent #(U.S.) 5707143, (Canada) 2193902.
NOTE: Specifications subject to change without notice.
Specifications
Height: 4 (10.2)
Lamp opening: 3-1/2 (8.9)
Diameter: 4-7/8 (12.4)
3" Finishing Trim
3E1
STANDARD EYEBALL
Narrow Flange
Series
3E1
3E1
Finish
(blank) White
MW Matte white
BN Brushed nickel
BZA Antique bronze
ORB Oil-rubbed bronze
2-5/8" (6.7)
4-7/8" (12.4)
3-1/2" (8.9)
4"
(10.2)
Downlighting and Track
Sheet #: 3E1 RADJ-210
Housing Compatibility
Housing and trim ordered separately.
Maximum
Application Source wattage Housing
IC Incandescent 50 PAR20 L3, L3R
50 R20 L3, L3R
For shortest lead times, configure product using standard options (shown in bold).
Example: 3E1
ORDERING INFORMATION
Catalog Number
Notes Type
All dimensions are inches (centimeters) unless otherwise specified.

Summary of content (2 pages)