Specification

Indoor Decorative
Dentil
FEATURES & SPECIFICATIONS
INTENDED USE
Provides general illumination in residential and light commercial applications.
Ideal for use in offices and all rooms in the home.
ATTRIBUTES
Solid wood frame accented with popular crown molding design with dentil
detailing, matches dentil cabinetry. Available in oak or white finishes. Unique
flush mount system eliminates light leaks. Durable, milk white acrylic dropped
dish diffuser provides a wide spread, uniform illumination. Matt texture pre-
vents fingerprints. Lift and shift diffuser provides easy access for cleaning and
maintenance. Available in three sizes: 1'x4', 2'x2', or 1-1/2'x4'.
Utilizes linear T8 lamps for energy efficiency, superior color rendering and
long life (not included).
Standard with 120 volt, 60 Hz electronic ballast ensures no flickering and quiet
operation without interfering with other electronics. Also available in other
ballast configurations.
For use with non-dimmable switches only.
All mounting hardware included.
LISTING
RE ballast fixtures are UL listed and CSA certified (standard), suitable for damp
locations and ENERGY STAR
®
qualified. For non-RE ballast fixtures, UL (stan-
dard) and for CSA certified (see options).
WARRANTY
Guaranteed for two years against mechanical defects in manufacture.
Light Concepts Indoor Decorative - Linear - Classic Collection
Sheet #: DENL
DEC-433
Catalog Number
Notes Type
CLASSIC COLLECTION
Linear T8 Fluorescent
Example: 11654RE WH
ORDERING INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and write it on the
appropriate line. Order accessories as separate catalog numbers.
Model Number
1,2
Ballast/Voltage
7
(blank) RE ballast
fixtures only
MVOLT Multi-volt
120 120 volt
277 277 volt
347 347 volt
Lamp
5
(blank) RE ballast fixtures only
Non-RE ballast fixtures only
17 17W T8 (2' fixtures only)
U31 31W T8-U (1-5/8" leg)
6
U316 31W T8-U (6" leg)
6
32 32W T8 (4' fixtures only)
Finish
OA Oak
WH White
Residential Ballast
4
RE 120 volt residential
electronic ballast
(standard)
(blank) Other voltage and ballast
types available
(see ballast/voltage)
Options
GEB Electronic ballast, <20%THD
GEB10IS T8 electronic ballast, <10%
THD, instant start
GEB10RS T8 electronic ballast, 10%
THD, rapid start
CSA CSA Certified
8
Consult factory for other
options and accessories
11654 1'x4' - (2) 32W linear T8 lamps
11655 2'x2' - (2) 31W T8 U-lamps
11656 1-1/2'x4' - (4) 32W linear T8 lamps
DIMENSIONS
Notes:
1. Lamps not included.
2. Use with non-dimmable switches only.
3. Lamp configuration for RE fixtures is standard U316.
4. Residential electronic ballast standard and requires RE designation.
5. No designation for lamp type is required on RE ballast fixtures.
6. Only available with 2'x2' fixtures (Also can be ordered on RE
ballast 2x2 fixtures).
7. No designation for ballast/voltage type is required on RE ballast fixtures.
8. CSA standard on RE ballast fixtures.
Nominal Lamp Model Number (A) Width (B) Length (C) Extension*
Size Configuration Number of Lamps inches (cm) inches (cm) inches (cm)
1' x 4' 11654 (2) 32W linear T8 15-1/4" (38.7) 53" (134.6) 4-3/8" (11.1)
2' x 2'
11655 (2) 31W linear T8 28-3/4" (73.0) 28-3/4" (73.0) 4-3/8" (11.1)
U31 or U316
1-1/2' x 4' 11656 (4) 32W linear T8 20-5/8" (52.4) 53" (134.6) 4-3/8" (11.1)
* Extension from ceiling All dimensions are in inches (centimeters)
(A)
(B)
(C)
Accessories/Replacement parts
DSBDDROP 1' X 4' dropped white acrylic diffuser
DSBDDROP2 2' X 2' dropped white acrylic diffuser
D15SBDDROP 1-1/4' X 4' dropped white acrylic diffuser
Linear Flush Mount