Specification

Indoor Decorative
Cambridge
Linear Flush Mount
Linear T8 Fluorescent
FEATURES & SPECIFICATIONS
INTENDED USE
Provides general illumination in residential and light commercial applications.
Ideal for use in offices and all rooms in the home.
ATTRIBUTES
Solid wood frame accented with popular crown molding design. Available in
oak, unfinished oak, white, maple and off white finishes. Unique flush mount
system eliminates light leaks. Durable, milk white acrylic, dropped dish diffuser
provides a wide spread, uniform illumination. Matt texture prevents finger-
prints. Lift and shift diffuser provides easy access for cleaning and mainte-
nance. Available in three sizes: 1'x4', 2'x2', or 1-1/2'x4'.
Utilizes linear T8 lamps for energy efficiency, superior color rendering and
long life (not included).
Standard with 120 volt, 60Hz electronic ballast ensures no flickering and quiet
operation without interfering with other electronics. Also available in other
ballast configurations.
For use with non-dimmable switches only.
LISTING
RE ballast fixtures are CUL listed (standard), suitable for damp locations and
ENERGY STAR
®
qualified. For non-RE ballast fixtures, UL (standard) and for
CSA certified (see options).
WARRANTY
Guaranteed for two years against mechanical defects in manufacture.
Light Concepts Indoor Decorative - Linear
DEC-430
Sheet #: CAML
Catalog Number
Notes Type
Example: 11430RE OA
ORDERING INFORMATION
Choose the boldface catalog nomenclature that best suits your needs and write it on the appropriate
line. Order accessories as separate catalog numbers.
Model Number
1,2
DIMENSIONS
Ballast/Voltage
7
(blank) RE ballast
fixtures only
MVOLT Multi-volt
120 120 volt
277 277 volt
347 347 volt
Nominal Lamp Model Number (A) Width (B) Length (C) Extension*
Size Configuration Number of Lamps inches (cm) inches (cm) inches (cm)
1' x 4' 11430 (2) 32W linear T8 15-1/2" (39.4) 53-1/8" (134.9) 4-1/8" (10.5)
2' x 2'
11431 (2) 31W linear T8 29" (73.6) 29" (73.6) 4-1/8" (10.5)
U31 or U316
1-1/2' x 4' 11432 (4) 32W linear T8 20-7/8" (53.0) 53-1/8" (134.9) 4-1/8" (10.5)
*
Extension from ceiling All dimensions are in inches (centimeters)
(A)
(B)
(C)
Accessories/Replacement parts
DSBDDROP 1' x 4' dropped white acrylic diffuser
DSBDDROP2 2' x 2' dropped white acrylic diffuser
D15SBDDROP 1-1/2' x 4' dropped white acrylic diffuser
Residential Ballast
4
RE 120 volt residential electronic
ballast (standard)
(blank) Other voltage and ballast types
available (see ballast/voltage)
11430 1'x4' - (2) 32W linear T8 lamps
11431 2'x2' - (2) 31W T8 U-lamps
3
11432 1-1/2'x4' - (4) 32W linear T8 lamps
Finish
OA Oak
UNFIN Unfinished
WH White
MA Maple
OW Off-white
Lamp
5
(blank) RE ballast fixtures only
Non-RE ballast fixtures only
U31 31W T8-U (1-5/8" leg)
6
U316 31W T8-U (6" leg)
6
32 32W T8 (4' fixtures only)
Options
GEB Electronic ballast, <20%THD
GEB10IS T8 electronic ballast, <10%
THD, instant start
GEB10RS T8 electronic ballast, 10%
THD, rapid start
CSA CSA Certified
ult factory for ballasts and
Consult factory for other
options and accessories
Notes:
1. Lamps not included.
2. Use with non-dimmable switches only.
3. Lamp configuration for RE fixtures is standard U316 (6" leg).
4. Residential electronic ballast standard and requires RE designation.
5. No designation for lamp type is required on RE ballast fixtures.
6. Only available with 2'x2' fixtures (Also 1-5/8" leg can be ordered on RE
ballast 2x2 fixtures).
7. No designation for ballast/voltage type is required on RE ballast fixtures.